MFG Manufacturer Directory

Find the right manufacturer for your custom parts.

793 5-star Manufacturers Found

APLUS MOULD CO., LIMITED

5.00 (11)

Shenzhen, ?? (Guangdong)

Job Shop / Contract Manufacturer

2010

200-500

APLUS MOULD CO., LIMITED was established in 2005. And based in the "City Of Design"-Shenzhen China. We started with a small mould shop depending upon the mould design and building here. Due to our quality product outputs and professional responses. Therefore, We acquired lots of positive ratings from customers we were working with. With customers business increase with different manufacturing and purchasing requirements. We added both the injection moulding and mechanical assembly services successively. We right now grew to over 300 people a diversified manufacturing and production company.Considering both the industrial upgrading and sustainable development in the future. We now aim to new product research, design and manufacturing on consumer electronics and artificial intelligence products. We have been successfully developed and manufactured some innovative electronic products with customers in the past years. And we received very positive feedback from customers as well. As a professional manufacturer, It’s not only about producing awesome parts, but it is also about fully understanding what customer needs are. Therefore, We perform complete design for manufacture as well as design for a cost analysis for every job we take on. We deploy quality tools to ensure processes stay in control, including process control plans, FMEAs, and have a full array of precision measuring equipment. We care about customer’s satisfaction and our ratings can attest to that commitment.Being situated in Shenzhen enables us to help you innovate with astonishing speed and agility, being at the heart of the worlds hardware and tech eco-system. Our experienced product development team can handle everything from soup to nuts, from prototyping to short-run production and everything in between. We are also capable of helping customers with PCB manufacturing as well as other highly niche manufacturing processes. For more information Please visit our website at WWW.APLUSMOULD.COM As well as you can email us at LeoKong@APlusMould.com

CHENGDU AERO TEACHNOLOGIES CO., LTD

4.67 (9)

Hong Kong, Hong Kong

2015

20-50

Our company has 10 years experience to provide high quality parts to foreign company. •We are dealing with the following materials : aluminum, Stainless steel, alloy steel , tool steel, titanium,,Inconel ,copper, carbon fiber, UHMW PE and etc.

Diode Machining Technology China Limited

4.67 (39)

Guangzhou, ?? (Guangdong)

2019

10-20

For better communication, you can add my wechat-- 18617340117 to talk.Here is company introduction Video https://youtu.be/B4sfAQyyPsM http://www.56.com/u47/v_MTcwMDk4NzU2.html When it comes to engineering and manufacturing abroad, we understand that excellent communication is essential. Diode Machining Technology Limited is owned by Ryan Yang, a certified Mechanical Engineer who graduated from the University of Richmond with extensive experience and understanding of doing business with the US and Europe. Having been established for well over a decade, we offer services covering a wide range of manufacturing processes. With a wholly-owned manufacturing facility focused on CNC Machining and Tool and Die manufacture, we also have a robust supply chain management team and established partners, enabling us to offer high-quality casting, metal stamping, fabrication, extrusion and more. Being fully ISO9001:2015 certified, we are fully committed to continuous improvement and invest heavily in our ability to control our processes. We would love the opportunity to have a chat with you to discuss your needs.

F3 MetalWorx

5.00 (1)

North East, Pennsylvania

Job Shop / Contract Manufacturer

2020

50-100

F3 Metalworx brings the unique synergies of its three product families to market. Comprised of Wire Weld store fixtures, precision sheet metal manufacturing and powder coating – F3 Metalworx offers its customers a one-stop resource for a wide range of custom fixture, fabricating and finishing solutions.Precision Sheet Metal FabricationFabricatingF3 MetalWorx has established a reputation for fabricating high quality, tight tolerance sheet metal products for a wide variety of industries. We excel in manufacturing light gauge steel, stainless steel and aluminum products in quantities from prototype to production.Powder Coating & AssemblyFinishingF3 MetalWorx is a premier powder coating provider for a range of industrial and commercial products. In order to be a complete finishing resource, we have multiple coating lines enabling us to handle high and low volume runs, as well as offering assembly and packaging services.Shelving Systems & Store FixturesWire Weld FixturesF3 MetalWorx has been providing beautiful, durable, market-leading storage solutions for more than 35 years. The versatile nature of our standard components allows our customers to develop custom retail display, light industrial, and home storage solutions appropriate for any market.

First Industrial Co., Ltd.

5.00 (12)

Dongguan City, ?? (Guangdong)

2014

100-200

First Industrial Co ., Ltd offers a wide range of services including product design, plastic injection molding , CNC machining , laser cutting, sheet metal bending, and lay-up mold making. Our skills and technology help clients solve any issue. We are one of the grey beards of Chinese manufacturing. Metal and plastic are our core competencies along with a more recent focus on sheet metal products. We are not only good at providing customers with high quality products at competitive prices but we also offer any consultation that may be needed regarding choosing the correct production technique. We also provide our customers with complete sourcing capability. We can easily handle large volume orders including intermediate aggregation and warehousing. Small volume orders and prototypes are also accepted, as we have no minimum order requirement. We primarily serve markets in the US, Europe, and Canada where we enjoy long standing relationships based on service and quality. Quality is our culture. Our goal is to make innovative products with the highest quality, at a competitive price, with prompt delivery. If you are interested in our company, we welcome you to visit our factory and learn more about our business.

Group Megatech Inc.

5.00 (1)

Quebec, Quebec

2020

Megatech is a leader in high precision, high quality CNC machining for prototypes and small batch orders mainly in the optics & photonics, biomedical, aerospace and non-destructive testing markets with most of its clients in Canada and the United States. Surface treatment in house:anodizehard anodize (typ 3)chem film (ROHS)passivation we also doGravity Aluuminum Casting using Green Sand Process, No Bake Sand Process and Permanent Mold. Casting up to 3000 pounds, volume from few units up to 30 000 units annually, high Quality Casting serving markets as Medical, Energy, Semi-Conductor, Military / Defence, Automation, Transport and more.Alloy A356, 413, 535, 713, 206, Duralcan and more, Heat Treatment in house as T4, T51, T6, T77.Quality Control and inspection in house with Real Time X-Ray inspection, Penetrant Liquid Inspection, CMM, 3D Scan, Tensile Test, Spectrometer, Micro-Structure, Borescope,

Located in Shenyang China, Liaoning Jiayu Precision Manufacturing Co. was established in 2006, specializing in manufacturing high precision CNC machining parts, investment castings as well as in custom metal processing service and OEM/ODM service. Besides, small orders are acceptable. We have such kinds of machines: CNC lathe, general lathe, general milling, CNC milling, drilling machine, internal grinder, cylindrical grinder machine, centerless grinder machine, two castings production lines and other equipment. Machining accuracy/tolerance: +/-0.1 ~ 0.005mm. Our machining scope covers as follow:1. Medical&Technological parts 2.The Automotive parts 3.The telecommunication parts 4.The power tool parts 5.Construction parts 6.The agricultural parts 7.Energy related parts Our company has a team of highly qualified and skilled professionals. We are dedicated to providing all customers with quality products and very reasonable prices. We encourage technological innovation and adhere to our business philosophy of "technological innovation, manufacturing expertise and timely service". We are committed to meeting the strictest requirements of our customers by reasonable prices, good quality, timely delivery and excellent services. We sincerely welcome you and look forward to cooperating with you for a bright future.

Suntanc precision manufacturing co., Ltd

4.91 (44)

Huizhou, ?? (Guangdong)

2017

50-100

SUNTAC Precision Manufacturing Co., Ltd is located in China, its core competence is CNC machining service, mold design, mold manufacture, injection molding, pad printing and high-value added complex assemblies. The company currently employs 215 people of which 50 are qualified and experienced tooling, molding design engineers. It utilizes a total space of 10,000?. The main mold equipment is from Agie -Charmilles, Makino, Mikron, etc. Injection equipment is from Sumitomo ,Yushin and Kawata. The measurement center is equipped with a number of CMM , Smart scope and other complete measuring equipment. Tolerance can reach at 0.003mm normally.

WY Metals

5.00 (1)

Dongguan, ?? (Guangdong)

2019

200-500

WHAT WE DO? Weiyu Precision Limited is owned and operated by entrepreneur Amy Cheng, a 15-year veteran in manufacturing with extensive experience in manufacturing management. ******3-5 AXIS MACHINING************SHEET METAL************ANNODIZING IN-HOUSE***************PRODUCT DEVELOPMENT**************COMPONENT SOURCING*************ASSEMBLY******* OUR WHY? Initially, Amy started her career in the role of purchasing and supply chain management (Sourcing components and making parts for LG and Samsung televisions). After a few years, Amy got promoted to plant manager, responsible for organizing supply chains and assembly lines for all electronic products. This experience enabled her to understand a wide range of manufacturing processes, including reliability and repeatability, enabling her to drive continuous improvement. After several years, she decided to start her own manufacturing business. Seeing fast growth in precision custom parts manufacturing, she decided to start a small factory with two seasoned engineers. Initially, they started small with only a few CNC Press Brakes and Milling Machines. Over the next ten years, they have grown significantly, covering a 6200m2 facility, over two hundred people, across three factories, including their in-house anodizing facility serving a wide range of industries. ******THREE WHOLLY OWNED FACILITIES COVERING 9600M2************OVER 200 EMPLOYEES************ISO9001:2015 QMS CERTIFIED************TS16949 (Certification Pending) ****** HOW WE CAN HELP YOU We can help you with all of your product development and custom part manufacturing needs. We can take you from sketch to scale with our in-house team of manufacturing engineers, advanced equipment, and passionate project managers and help you bring your product to market.

3D Usher

4.83 (6)

Syracuse, New York

Job Shop / Contract Manufacturer

2019

20-50

Located in Syracuse, New York, 3D Usher is an on-demand manufacturing company that provides a wide range of manufacturing services to various companies around the world. We have engineers and account managers located in the USA & India that can help with your manufacturing projects. We ensure that your product is manufactured within the best possible time frame and its quality is well-examined before it is delivered to you. We help with manufacturing of plastic & metal parts across the product cycle - mass/batch/prototype manufacturing & design. Our services include: Injection Molding, CNC Machining, Vacuum Casting, 3D Printing & 3D Design.

Access Assembly

5.00 (3)

Mundelein, Illinois

2008

<10

We are anemerging and fast developing Contract Manufacturing Company with our roots firmly based in the electronicdevices manufacturing.The formation of our management team has its core values based on the standards established by the GMP and GDP as well as strict adherence to the governance set by the regulatory agencies. We are ISO 9001:2000 certified and our goal for the near future is to obtain ISO 13485 for Medical Devices, ISO/TS 16949 for Automotive Standards and ISO/AS9100 Aerospace Quality Standards. Currently in our industry the primary focus of supplier-customer relationship is "productivity" and "efficiency". While these terms also describe us very well we feel that the terms "friendly", "helpful", and above all "customer oriented" fit our mold. It may seem almost quaint given our industry to hear a company describe themselves using these latter terms, but this is what Access Assembly is, and we are justifiably proud of it. At ACCESS ASSEMBLY our main business is ASSEMBLY. We are an "Assembly House". We build custom electronics, cable assemblies, wire harnesses, electronics devices. Everything is 100% tested and our defect rate is near 0% . We have a strong network of relationships within the medical, automotive, telecommunication, security/ safety, and military industries so that our customers can rest assured that they will receive the personalized service they deserve. We can accommodate any order regardless of size. We offer more than just a set of hands to put individual pieces together. Our team of manufacturing professionals will guide the customer through the entire process and provide the optimum assembly solutionand most efficient method to complete the job. The welcome result is that our customers can lower their total overall costs, attain a better handle on their asset and overhead utilization, and keep their inventory levels low. This translates into a "shorter time to market" as well as increased ability to respond to market demands and fluctuations without being limited by the manufacturing cost. At the same time we give our customers the ability to focus on their core business. We are committed to quality and constantly looking for opportunities that can make us, and our customers, successful. Please contact us at 847-894-1047 or e-mail at customerservice@accessassembly.com

Access Precision Machining Ltd.

5.00 (2)

2016

20-50

Access Precision Machining Ltd is located in Salmon Arm, British Columbia, one of the most beautiful places in Canada. Our employees love living here and that contributes to our extremely low staff turnover. We are centrally located between Calgary and Vancouver and just a few hours more to Edmonton and Prince George. This gives us greater access to markets for sales and material purchases. The lower cost of doing business in Salmon Arm easily makes up for any extra costs in freight.

Advanced Cutting Systems

5.00 (13)

Fort Wayne, Indiana

Manufacturer

2007

20-50

Advanced Cutting Systems, Inc. is a metal fabricator located in Fort Wayne, IN. We specialize in abrasive waterjet cutting, laser cutting, forming, and welding. The Company has been ISO Certified since 1996. Our focus is to provide the highest quality parts in a timely fashion at a reasonable price. Our strength is our people. Our management team boasts a combined 75 years of experience in metal fabrication. We always strive to meet or exceed our customers requirements. We believe that the best way to serve our customers is to treat them as partners. Our success is directly tied to the success of our customers. Therefore, every part we produce for the customer is directly tied to the success of Advanced Cutting Systems. We welcome the opportunity to develop new relationships with new partners so that we can jointly experience success.

AGB LLC

5.00 (11)

West Unity, Ohio

2017

<10

AGB was founded in 1985,and is a heavy stamping, machining, and die making facility. Over the years, AGB has served the heating and cooling industries, automotive, electronics, agriculture, scaffolding industries. We pride ourselves with over 30 years of experience in the manufacturing industry. Our focus is on high quality parts and meeting the needs of our customers. Some of our capabilities include fabrication, grinding, machining, stamping, toold, die, and mold making, and screw machining. Call or message us today so that we can help you meet your manufacturing needs!

Allied Machining & Engineering

4.55 (44)

Rancho Cordova, California

2018

100-200

Allied Machining Engineering, Inc. (AME) was founded and registered in Maryland, US in 2007 and has grown into an international group located in both US and China for quality parts and outstanding services as well as continuous innovative development. AME started with the business of molding, machining and casting parts.For strategic reasons, we moved to Wuxi, China in 2010 and further expanded our business to include fabrication and assembly. With years of development, our China factory not only keeps traditional business for molding, machining and casting parts, but also further turns into a super fabrication center for dryers, converting lines and RTOs. We also have one factory in California,known as ConQuip, Inc., and specializing in design, engineering and assembly of converting lines. Combining advantages in both US and China, AME now is able to supply high-quality products with lower cost. Our motto is "BRING THE WORLD CLOSER" and it is our great pleasure to see we are working toward this goal. Our China factory is equipped with a wide variety of advanced precision machines: Hass CNC Mill, Clausing Metosa CNC lathe, Ramco wide belt sander, CNC wire-cutting machines, grinding machines, injection molding machines, etc.Machinists with 20 years of experience are responsible for manipulating the equipment and offering training for young people. Composed of people with various experience and expertise, our management group work collaboratively to serve our company to make her the best choice for both our employees and our customers. AME has enjoyed a good reputation ever since its establishment. AME does not sell ready-made, but custom products, either small injection molding or machining parts or large customized equipment. It is our advantage to provide you exactly what you need and when in need as well as excellent technical support via globalization. We have sales and marketing teams in the US and in China. During the past 9 years, MFG has been one of our best channels to connect with valued customers.

Alphaeus MFG

5.00 (6)

St George, Utah

Manufacturer

2016

<10

We are located in St George, Utah. At Alphaeus Manufacturing our focus is on you, our customer. Your satisfaction is at the forefront of our business and as such we are dedicated to providing you with the highest standards of workmanship, service and competitive pricing in the industry. We focus on providing a level of precision and versatility that allows us to cater our machining and prototyping services to very specific customer needs. When you need high quality parts, regardless of your industry, Alphaeus Manufacturing is your source. From firearm, medical and biotech companies to customers in the semiconductor, motor sport, and vacuum forming industries — we have experience with an extremely wide range of customer requirements. So whether you need prototype parts or a full production run, our skilled machinists can quickly and efficiently provide precision CNC Machining to your specifications, in a variety of materials.

Alpine Elastomer Products, LLC

4.75 (4)

Boonton, New Jersey

2004

10-20

Alpine Elastomer Products, LLC is a custom made rubber and plastic product supplier of precision molded rubber and plastic products, rubber to metal bonding, extrusions and die-cutting. USA and China production: Offering our 20 plus years of molding experience at our Boonton, NJ facility and Far East production from our approved factories in Mainland China. From concept through full production. competitive pricing on general and industrial rubber products such as:Electronic insulating productsSilicone Keypads for electronic products. Wide range of materials including:LSR liquid silicone rubberPVCPUTPE's thermo plastic elastomers. Processes include Compression, Injection, Transfer Molding, Extrusions and Die-Cutting.

Aluminum Shapes

5.00 (1)

Pennsauken, New Jersey

Job Shop / Contract Manufacturer

2020

50-100

Located in Delair, New Jersey, Aluminum Shapes has been in the aluminum extrusion business since 1954. We started out with only one extrusion press and since have grown to 6 presses ranging from 2000 ton up to 6500 ton with capabilities to extrude 24 inch wide shapes. Aluminum Shapes also has their own fabrication department with many different capabilities for not only aluminum extrusion but also various kinds of materials. I did list our equipment in our company profile. Shapes also has their anodizing line for longer larger pieces of aluminum, we are however in the process of designing and building multiple fixtures so we can anodize smaller parts as well. The anodizing colors we offer is clear, black, bronze, and champaign. Aluminum Shapes is also ISO certified. We offer all of these services under one roof.

American Additive Manufacturing

5.00 (1)

Horsham, Pennsylvania

Job Shop / Contract Manufacturer

2020

American Additive Manufacturing is a 3D Printing Service Bureau printing high quality rapid prototypes, functional prototypes,design models & visual aids, jigs & fixtures (composite layup & trim tools, thermoforming,assembly, work-holding, mistake-proofing, go-no go, CMM), robotic end-of-arm tooling,training models, art, trade show & retail displays, production parts, custom solutions.

AMT

5.00 (5)

Chattanooga, Tennessee

Manufacturer

2020

10-20

AMT is a precision CNC machine shop with a broad range of capabilities that excels at finding solutions for difficult to manufacture parts. AMT is able to machine parts from about 1/4" DIA to 144" DIA x 120" tall, and up to 96" x 96" x 96" on our mill. A few of AMT's other capabilities include:Precision CNC Turning & MillingEngineering & Design workPrototyping3-D PrintingFabricationAssemblyWeldingID/OD GrindingSurface GrindingWire EDM (5 Axis With 15" Throat) AMT works with almost any metal (nothing 10% or higher lead content) or plastic, and will even develop unique processes for specific customer needs. We currently work with quantities ranging from 1 to 1,000 (as much as 10,000 depending on complexity of the parts).

AMT PRECISION

5.00 (1)

nogales, Arizona

Manufacturer

2017

10-20

AMT is a team of professionals with a high technical profile and high experience in CNC machining processes, mechanical design, automation and industrial maintenance. Our main objective is to be the best option for our clients based on quality, efficiency, technology and great sense of urgency.

Ansla Science Technology Co., Limited

5.00 (5)

shenzhen, ?? (Guangdong)

2008

20-50

Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment.All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….????: ???????????????2009?2?/Found in 2009-2.????:2200???/working spacing: 2200SM.????:30? / workers: 30 people.????:10?/Engineering team: 10 people???; 7?/Quality team: 7 people???:3?/Purchase team: 3 people????/production equipment: T500 CNC 16? (TaiKan) T850 CNC 14?(TaiKan) ???/EDM 1? ??/Granding 2? ??/Milling 2? ???/Injection 10?(HaiTian)?????/Inspection machines:???????/refer to list in the next pages. ????:??????????,???????,???????????,??????????Main Products:Auto parts, medical parts/products, products for airport and ground service, also we customize the products per customer’s design/requirement. ????:Andy LiuAndyliu@ansla-tech.cmTel/WhatsApp: 86-186-7553-8210Skype: lzm200305

Appalachian Tool & Machine

5.00 (2)

Swannanoa, North Carolina

2020

20-50

Appalachian Tool & Machine INC. is committed to exceed the needs of our customers. Our policy is to supply products on time, free of defects, and consistently conforming to our customer’s requirements by doing the job right the first time. We will strive to attain world class quality and process capability with an overarching target of 99.5% customer delivery acceptance rate.With the recent purchase of our 45,000 square foot facility on 15 acres, and more than 60 different machine tools, we are positioned to significantly increase value to our customer base.

ASSEL SRL

5.00 (3)

Romano Canavese, Piemonte

2009

10-20

Assel srl represents the evolution of a decades-old experience of high craftsmanship in the field of precision - mecanics technologies and assemblages. Ours esperience in producing dot matrix printheads has enabled us to operate in other fields of computer hardware as well as in those of office automation, devices and all kinds of operations requiring mecanical or electro-mecanical support, e.g. welding and manual or automated assemblig. Besides that Assel operate on the engineering field : provide prototypes and small series components, plan and produce devices and equipements to processing and testing automation, for herself and customers. Technological research and substantial investments in appliances and automation have resulted in highly skilled workers, all of whom operatewithin ISO 9001/2008 (DNV Certification)

MFG is Where Manufacturing Gets Done


100,000+ Manufacturers

Reviewed and Verified

26 Distinct Marketplaces

Aligned To Your Needs

~1,000,000 RFQs

Manufacturing RFQ Marketplace

Ready to jump in? Join Free Now