MFG Manufacturer Directory

Find the right manufacturer for your custom parts.

Sigma Tek Inc.

Augusta, Kansas

Job Shop / Contract Manufacturer


Founded in 1983, Sigma Tek Inc. manufactures and distributes aviation instruments, and accessories for the light aircraft general aviation industry.

We specialize in CNC Milling and Turning of smaller precision parts holding tolerances as low as +/-.0001".

We have the ability to machine parts up to the following sizes:

  • 40"x20" for milling
  • 9.75" Diameter for turning
  • 72" x 144" for waterjet cutting.

MRS Machining

5.00 (1)

Augusta, Wisconsin


Roger Guse began M.R.S. Machining Co., Inc. in 1986. He started machining small jobs in his garage. Once he became too busy, he brought his son, Matt, into the business. Today, Roger, Matt and their wives Nancy and Vicki make up the Board of Directors. As a minority owned business, M.R.S.Machining has prospered over the last 21 years and has enjoyed continuous growth. The machine shop now occupies over 20,000 square feet and is located in the Augusta, Wisconsin Industrial Park. Approximately 30 employees make up the production staff, with approximately 13 employees making up the support staff and management team. The hours of operation are split between two shifts. Additionally, M.R.S. was recently voted among the Nation's Top 10 Machine Shops by American Machinist magazine. Our Production Department has made huge strides in the last few years. All machining centers include a computer station where all processes and procedures are generated and saved in the network. Typically each job is documented with inspection sheets, job notes, numbered prints, photographs and videos for future reference. M.R.S. Machining continues to grow today. In 2007, a 5,000 square foot addition was built to house the new Education Center for machine shop training, to accommodate more machining equipment, and to provide sorely needed storage. All departments were growing and in need of more space. Other building improvements include air conditioning the main machine shop floor. This has been a tremendous relief for all machinists as well as for the machines. M.R.S. Machining continually strives to be cutting edge, using up to the minute technology, doing whatever it takes to be a better company for its customers as well as for its employees.


4.17 (6)

Assoro, Sicilia


NEBIOLO HT S.r.l. is a machine shop able to produce all kind of complex parts in different dimensions and quantities. NEBIOLO HT S.r.l. pride ourselves in providing their customers best quality and service available from the design to the production release of final product. Lots of European buyers given to this supplier a lot of evaluation in the platform Is possible to read and have access to comments of the buyers on the profile in NEBIOLO HT S.r.l. in based in Sicily in Italy and have a superficies of 25000 mq of extension so there is no problem of big dimension of parts and also high volume if productions. NEBIOLO HT S.r.l. is an integrated contract manufacturer with project management capabilities to solve all the technical manufacturing challenges. In particular this machine shop is able to provide: CNC Milling, 4th axis mill capabilities, milling, turning, surface grinding, fabrication, laser cutting, with all the latest technologies in advanced milling techniques.


Assoro, Sicilia


Nebiolo HThad been established with the aim of producing and offering machine and apparatus for sales inside the range of publishing trade. In 2005 Nebiolo HT moved to a new settlement covering an area of 25000 mq with a covered area of 8000 mq. The acquisition of well-known Nebiolo trademark, as well as its know-how and its spare parts storehouse, allowed to start off a new spare parts service for Nebiolo-machine spread all over the market. Nebiolo HT Srl is working at introducing technological innovations into Nebiolo designs in order to provide the market with wide and medium printing presses which have distinguished themself as printing quality ("puntino nebiolo"). During the consolidation of its industrial planning, the company made itself known as a maker for third parties of separated or pre-assembled precision mechanical components. A youthful and flexible organization provides its clients with a careful and on time service focusing on requirements that are peculiar to the client, from design to prototype.
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} To stay competitive and profitable, manufacturers need to align themselves with suppliers and fabricators who can provide fast, accurate and cost-effective turnarounds on both one-off prototypes and large-quantity machining projects. Global Parts Aero Manufacturing Inc. (GPAM) can meet your needs. By combining experienced craftsmen with the latest in high-end machining capabilities we are a "small shop" with really "big shop" capabilities. GPAM is one of the few precision machining facilities in the country to boast a state-of-the-art Makino MAG1 5-axis horizontal machining center available for one-off prototyping and high-productivity machining of complex components for aerospace, automotive, marine and other tight tolerance industries. The Okuma Millac 1000VH 5-axis machining centers allow the production of complex, multi-face parts in one set up, improving accuracy and reducing overall cycle time. This machine is dedicated to machining exotic metals such as steel and titanium and gives GPAM the ability to manufacture high precision complex parts. Complementing the MAG 1 and Okuma is a full suite of CNC milling capabilities including, Haas UMC-750, full 5-axis and Haas VF-4SS, 4th and 5th axis wired machines. Quality and safety are paramount, and through critical inspection equipment including an Aberlink Zenith Too with an axis travel of x=1,000mm, y=2000mm, z=600mm, and a 4-foot Romer Arm accuracies can be ensured at the highest level. When it comes to machining, GPAM specializes in working with aerospace-grade, hard and exotic metals including titanium, magnesium, tool steel and stainless steel. We're also experienced in machining soft metals and other materials including aluminum, copper, plastic, phenolic, vinyl and others. Of course you can't save time or money if you waste materials. Our engineers use the latest in pre-production machine simulation software including Vericut Programming Perfection Software, Mastercam CAD/CAM and DISCUS software to ensure raw material waste is minimal while adhering to lean manufacturing standards. Programs such as these help reduce the development time for a first article by days, while improving short- and long-run production efficiency.

Andolina srl

AVOLA, Sicilia


Andolina SRL designs and profiling on request, in order to meet production requirements and optimize the product. The profiling Andolina vary depending on the type of profile and can be, at fixed bench, combined with the shoulder fixed and mobile. The cutting profile can be hydraulic (fixed or sprint) or tape Andolina Ltd designs and manufactures hydraulic presses for over 20 years of varying scope (Min 10 ton - Max 300 tons). Presses Andolina have high structural strength through careful selection of materials and meticulous craftsmanship manufacture. Andolina presses can easily mount electronic ballasts and tires (on request) and dies for cutting and bending (on request). The main models are; Gooseneck Presses Presses and columns Andolina SRL on the market for over twenty years for the production of vacuum boasts a wide range of winding and unwinding reels, single and double, and driven mad. The range of suction Andolina wide in scope (Min 0.5 ton - 30 ton max) also offers additional options which, Pinch - Roll hydraulic and pneumatic belt tensioning and load cradles Andolina Ltd. designs and builds specific request of the client machines 'special' to work for the plate and not part of the standard line that specializes Andolina. Andolina Ltd designs and manufactures electronic ballasts with processing capacity Min.100mm Max.1000mm-and thanks to their versatility can be mounted on mcchine competition. Andolina Ltd designs and manufactures electronic ballasts with processing capacity Min.100mm Max.1000mm-and thanks to their versatility can be mounted on mcchine competition.

Augusta Machine Welding Inc

Augusta, Georgia


Augusta Machine Welding Inc is located in Augusta, Georgia, United States and specializes in manufacturing the following processes: Machining, Sheet Metal, Fabrication.


Augusta, Georgia

THERMAL CERAMICS is a manufacturer based out of United States that joined MFG in 2013. They specialize in .

Lift Atlanta Inc.

Augusta, Georgia

Textile Distributor


Lift Atlanta Inc. is a Textile Distributor based out of United States that joined MFG in 2010. They specialize in .

L&H Machine Inc

AUGUSTA, Georgia



L & H Machine was established in January 2000.  Full service Machine shop with expert craftsmanship.

Precision machining with tight tolerances to +/- .0005

Advanced Industrial Fabrication

Augusta, Georgia

Job Shop / Contract Manufacturer


Advanced Industrial Fabrication is a Job Shop / Contract Manufacturer based out of United States that joined MFG in 2006. They specialize in FabricationMachining.

Augusta Machine & Welding, Inc

Augusta, Georgia

Job Shop / Contract Manufacturer


AMW has been serving industry with quality parts since 1974


Whether machining, welding, or fabricating, AMW completes assignments and always makes your machine or fabrications work.



Since 1974, Augusta Machine & Welding Center (AMW) has been providing industrial machine shop and machine works services as well as field machine shop services to industry, large and small. Our services include fabrication, machining, machine turning , milling and tool repair, welding (Stick, Dual Shield, Mig & Tig), rebuilds, tooling, crane services, and more. We can machine, weld, cut, bend, fabricate, duplicate, copy and create most anything made out of any metal.

MFG is Where Manufacturing Gets Done

100,000+ Manufacturers

Reviewed and Verified

26 Distinct Marketplaces

Aligned To Your Needs

~1,000,000 RFQs

Manufacturing RFQ Marketplace

Ready to jump in? Join Free Now