DIAPHRAGM, ETCHED 이 RFQ는에 www.MFG.com에 공급했다 USA for 케미칼 머시닝 REPLACEMENT OF CURRENT SHIPPING PRODUCT. NEED GOOD SUPPLIER APPROX .4 INCH DIA X .0012" THICK MOLYBDENUM WITH .040" CENTER HOLE. MATERIAL IS A VERY SPECIAL CROSS-ROLLED ANNEALED STRIP. MATERIAL IS AVAILABLE FROM ELMET TECHNOLOGIES, INC. ROLL DIAMETER SHOULD BE LARGE, AT LEAST 5 INCHES TO AVOID PRESTRESSING MATERIAL. AVOID ANY UNECESSARY HANDLING OF FINISHED PARTS. THERE IS A CRITICAL "GRAIN INDICATOR" FEATURE .005" LONG. CENTER HOLE TOLERANCE IS EXTREME. 구매자 정보 산업 Consumer Products 도시 / 지역 Oxnard, California 국가 USA RFQ RFQ 번호 342669 재질 Alloy Steel 재질 등급 CROSS ROLLED ANNEALED MOLYBDENUM FOIL 상세 기술적 요소 카테고리 케미칼 머시닝 치수 기계 상점, 날조, 작업 상점과 계약 업체에서 MFG.com에서 제조 서비스를위한 온라인 따옴표를 얻을. 구매자가 필요가 있고 공급자가 오른쪽 전문 지식과 능력이있는 경우 MFG.com은 구매자와 공급자를 연결합니다. 케미칼 머시닝: Photo Chemical Machining (PCM) is also known as Photo Etching, Photo Chemical Milling, Photofabrication, Chemmilling and Chemical Blanking. Chemical machining is primarily used in the production of thin and decorative parts. Chemical milling is considered a precision process and is most commonly used to machine sheets and foils. Chemical machining is widely used in the electronics and aerospace industries. Common applications of photo chemical machining include integrated circuit lead frames, surface mount paste screens, optical attenuators, encoder disks, jewelry and meshes. Most commonly a photo-tool is produced to the exact geometry to be machined using a laser photo-plotter. The photo-tool selectively exposes a photographic film according to the computer-aided design (CAD) data. Photo-resists are UV light-sensitive polymers. Photo-resists are applied to the metal to be machined as a liquid by dip coating, flowing, roller-coating, or electrophoresis. The coating of the metal sheet with photo-resist sensitizes it. When this sensitized metal is put into the double-sided photo-tool and is exposed to UV light on both sides, an image is etched into the photo-resist. The photo-resist tool is then developed in a liquid formulation to form a durable image on both sides of the metal.