35-00019 DUMP PUMP MOUNTING BRACKET

이 제품은 다른 RFQ 아이템의 하나로 www.MFG.com 을 통하여 수주 되었습니다. USA for 벤딩


BRACKET, 11.35" LONG X 1.00" WIDE WITH 2 90 DEGREE BENDS, MADE OUT OF 18 GA 304 SS. NO COSMETIC CRITERIA OTHER THAN DEBURRED AND CLEAN, SMOOTH.

Approximately 6.75 inch x 4.7 inch x 1.0 inch. Please see drawing for all specifications.

파트

파트 번호:       35-00019 DUMP PUMP MOUNTING BRACKET
재질:       
재질 등급:       18 GA 304


상세 기술적 요소

카테고리:벤딩

치수6.75 x 4.7 x 1.0 inch

오차:0.005

연 사용량:500.0

당신은 공작 기계 산업, 자동차 산업을위한 제조 서비스를 제공하는 공급 업체 (기계 상점, 날조, 바퀴, 성형 업체, 섬유 업체 등)를 찾고 계십니까? 자세한 내용을 보려면 다음 사이트를 방문 MFG.com

벤딩: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.