Rivestimento RFQ - Ottenere le quotazioni online da fornitori

I rivestimenti sono materiali che formano una pellicola continua sulla superficie della parte rivestita, conferendogli colore e lucentezza e salvaguardano le parti. I rivestimenti includono le vernici formulate per verniciatura a pennello/rullo, verniciature in polvere e verniciature spray tradizionali. Le vernici sono a base di acqua, olio e solvente e sono epossidiche, di poliestere, alla cellulosa, a smalto e al lattice.

Bike Frame

Rivestimento

Wooden plywood bicycle frame will be manufactured in Holland and shipped to US for final preparation/assembly. Need supplier to prep/clear epoxy coat the frames (or UV cured polyester) in a material that is suitable/durable enough for continuous outdoor use. The buyer is bidding on this jo...

Hood Strap

Rivestimento

Production of a Coating E-Coat / Electrocoating. Material is MS 264 050 XLF steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Parts to be manufactured in Mexico The buyer is bidding on this job for a customer. Although the order is not firm at...

Steel Balls, Black

Rivestimento

Production of a painted Steel Balls, Black. Approximately 0.4375" OD x 0.4375" long. Material is steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Cosmetic finishing. Steel ball bearings to be painted black. ...

ASML AT Tile Set

Rivestimento

Buyer needs 12 micron electroless nickel plating. Mecp-41346-00-100 shows quantities and part numbers. Buyer will provide parts and is requesting one quote for entire plating package....

Plastic End Cap

Rivestimento

Production of a machined plastic end cap. Approximately 150.98mm x 21.8mm x 12.5mm. Please see drawing for all specifications. We are looking for a supplier who make "Water tranform printing" (see the attached images for reference) for our full range of plastic end caps We’ll suppliy the plas...

Metal Angle

Rivestimento

Coating of a steel angle for the use of a componet for a bench. Approximately 14" long x 4.75" x 5". Please see drawing for specific dimensions. ...

Trident

Rivestimento

Gold plating for small electronic jewelry. Approximately 1.500" long x 0.500" wide. Please see picture for specifications. The whole assembly can be put into the plating solutions. The Electronic parts are unaffected by the chemicals. Buyer has sucessfully plated these parts with a small desk...

Tube

Rivestimento

Apporx size 4" square tubing x 6" long. Wall thickness .125" Also drill and tap holes. Finish black anodize The mfg. sub-process is left to vendor discretion....

Plunger, 4130 NQT

Rivestimento

Machined part approx. 5.2" by 3.0" diameter, base metal  4130 NQT. 0.001" electroless nickel, medium phosphorus...

Cap, 4130 NQT

Rivestimento

Machined part approx. 4" by 3.5" diameter, base metal  4130 NQT. 0.001" electroless nickel, medium phosphorus...

Body, 4130 NQT, API EUE 8 Rnd

Rivestimento

Machined part approx. 11" by 3.25" diameter, base metal  4130 NQT. 0.001" electroless nickel, medium phosphorus...

Rod,Sleeve,Blade

Rivestimento

THIS RFQ IS FOR PLATING ONLY. MACHINED PARTS TO BE DELIVERED TO PLATER. BUYER PAYS ALL SHIPPING. These three parts will be awarded to 1 PLATER.  Plating requirement: Copper, CU  0003-.0005 ASTM B 734-97. Nickel, Ni Bright  .00015 - .0002 ASTM B 689-97 PartsÂ...