Connectez-vous sur la place de marché MFG.com
Find the perfect manufacturer to make your RFQs or assembly.
Production of a OEM Bed frame attachment. Approximately 85.0 inch x 61.75 inch x 27.0 inch. ...
A buyer in Victoria, AUSTRALIA is looking to source 1 items (Molding)....
Black Square Carbon Fiber Tube-Buyer needs a prototype quote for 10 pieces as sample and a production quote of 1000 pieces. The prototype sample will be needed within two weeks, the production quantity will be needed in about a month. The tubing will be cut into 104 mm length...
Production of a Preformed Fabric. Approximately 40.0 inch x 1.73 inch x 0.6 inch....
Production of Telescoping Tubes. This is a telescoping tube assembly consisting of 0.75-inch, 1-inch and 1.25-inch tubes. The material is standard pultruded glass/polyester composite. Buyer prefers to have the 0.75-inch tube pultruded onto a polyethylene core, but Buyer would consider alternative...
A buyer in 广东 (Guangdong), CHINA is looking to source 1 items (Molding)....
This is a tube made of Fiberglass with some machining in both ends, it may be made by Poltrusion. Please note , this can be made of fiberglass tubing with ID from 40 to 48 mm, however OD has to remain 80mm....
It will be appreciate that you can also provide the supportA buyer in 上海 (Shanghai), CHINA is looking to source 2 items (Molding). 对供应商要求: 1.专业生产尼龙产品...
Production of a Plastic Grip Seal that will be used in an HVAC environment. Note: Buyer needs a 100 foot sample to approve.Seal material needs to have no dimensional deformation up to 200 degrees Fahrenheit. Drawing specifies PVC, but design is not limited to that material....
A buyer in New South Wales, AUSTRALIA is looking to source 1 items (Molding)....
Pultrusion of fiberglass reinforced T-12-10 pedestrian panels cut to specifications shown on drawings. "T" shaped pultruded fiberglass panels. Dimensions: 3 ft. ± 1/4 in. in load bar direction and approximately 17 3/4 in. in cross bar direction ...
made of black velour which is laminated to black plastic A buyer in CHINA is looking to source 1 items (Molding)....
A buyer in 上海 (Shanghai), CHINA is looking to source 1 items (Molding)....
附件中图片为图示:每套需要两个止退棒和一个塑料型材保护壳。优先考虑江苏地区供应商。 A buyer in 上海 (Shanghai), CHINA is looking to source 2 items (Molding)....
A buyer in 浙江 (Zhejiang), CHINA is looking to source 1 items ....
A buyer in 江苏 (Jiangsu), CHINA is looking to source 1 items (Molding).材料可以找相近的代替,请尽快联系我...
A buyer in 江苏 (Jiangsu), CHINA is looking to source 1 items (Molding).要求卷盘包装,方便smt贴片...
A buyer in 上海 (Shanghai), CHINA is looking to source 1 items (Molding). The buyer is quoting on this job for a customer, although the order is not firm at this time, the buyer will notify all quoting parties once a decision has been made....
A buyer in 浙江 (Zhejiang), CHINA is looking to source 1 items (Molding)....
This is a thin wall .5 mm kevlar/dyneema/glass pultruded case. Production of a Pultrusion Case (Pultrusion). Approximately 493.0 mm x 70.2 ...
barre diametro mm. 3,00 lunghezza metri 3 circa per barra diameter: 3mm, lenght of the bars 3 meters Realizzazione di un Pultrusione barre di fibra di quarzo - quartz bars....
A buyer in 上海 (Shanghai), CHINA is looking to source 1 parts (Molding)....
A buyer in 山东 (Shandong), CHINA is looking to source 6 parts (Forming)....
A buyer in 山东 (Shandong), CHINA is looking to source 6 parts (Molding)....
Buyer is looking for Domestic Quotes only! USA Only. Buyer is sourcing pultruded fiberglass rectangular tubing. Annual usage estimates from project engineer is 200,000 lineal feet. Start up after samples are approved and no design changes made, could be as soon as Q3 2010....
A buyer in 上海, 上海 (Shanghai),CHINA is looking to source 1 Molding parts....
A buyer in Shenzhen, 广东 (Guangdong),CHINA is looking to source 1 Molding parts. The buyer is quoting on this job for a customer. Although the order is not firm at this time, the buyer will notify all quoting parties once a decision has been made. ...
A buyer in Dongguan, 广东 (Guangdong),CHINA is looking to source 8 Molding parts....
A buyer in Dongguan, 广东 (Guangdong),CHINA is looking to source 1 Extrusions parts....
Production of a pultrusion molded Profile 2. Approximately 2.743" x 1.16" x 0.09". Material is FR Vinyl Ester/Glass - Toughened composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Must be made from Toughened Flame Resistant Vinyl Ester Re...
Production of a pultrusion molded Profile 1. Approximately 1.843" x 0.91" x 0.125". Material is FR Vinyl Ester/Glass - Toughened composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Must be made from Toughened Flame Resistant Vinyl Ester R...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 10.8mm x 10.55mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office fu...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 32.54mm x 14.68mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 13.12mm x 10.67mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 21.34mm x 17.78mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 9.75mm x 7.62mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office fur...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 15.17mm x 8.13mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 24.79mm x 14.38mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a pultrusion molded Panel connector. Approximately 1000mm x 16.03mm x 10.74mm. Material is PVC plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. co-extruded PVC to be used in adjunction to aluminum extrusion in high-end office f...
Production of a fiberglass Rod 6. Approximately 0.5" OD x 141" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quotes for each length. All radial dimensions +/- .010 Taper grind with white paint finish. Pr...
Production of a fiberglass Rod 5. Approximately 0.5" OD x 117" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quotes for each length. All radial dimensions +/- .010 Taper grind with white paint finish. Pr...
Production of a fiberglass Rod 4. Approximately 0.5" OD x 93" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quotes for each length. All radial dimensions +/- .010 Taper grind with white paint finish. Pro...
Production of a Poltruded Fiberglass Rod. Approximately 0.5" OD x 57" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. QUOTES FOR EACH LENGTH ALL RADIAL DIMENSIONS +/- .010 TAPER GRIND WITH WHITE PAINT FINISH P...
Production of a fiberglass Rod 2. Approximately 0.5" OD x 57" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quotes for each length. All radial dimensions +/- .010 Taper grind with white paint finish. Pro...
Production of a Poltruded Fiberglass Rod. Approximately 0.5" OD x 33" long. Material is Fiberglass composite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a radome tube. Approximately 102mm OD x 1390mm long. Process : PULTRUSION and Materials: GLASS FIBERS (Compatible With Microwaves Radomes Applications) - EPOXY RESIN, Natural Color (Exepted White) or Mass Teinted (POLIE) ...