Accedi al tuo account Marketplace di MFG.com
Find the perfect manufacturer to make your RFQs or assembly.
SAND CASTINGS WITH NO X-RAY, QUOTE TOOLING AS A SEPARATE LINE ITEM. Any other type ex: Spin cast...
Part is 8" x 2". Complete to spec....
Production of an aluminum tube. Approximately 9.75" OD x 59.25" long. If price and quality is good, this will be a long term business relationship. Please see drawing for specific dimensions....
Quote quantities shown on the attached drawing (10, 50, 100, 200, 400) Made from Alloy 190 ASTM A 297 Grade; 8.5" Dia x 67+" long...
Parts to be rough casted then machined to specs....
Intergal Part of a Multi Tube Dust Collector for Boiler Exhaust. Flange Ear Dia 10.625" x 23.75" long overall....
Cast cap and tube assembly for a filtrtation system in a large diesel engine. Approx. 8.75" OD x 4.36" high x .5" minimum wall thickness. Material: Casting Iron...
Production of a cylinder liner. Approximately 238.125mm OD x 540mm Long. Please see drawing for all specifications. ...
Production of a centrifugal cast Collector Ring. Approximately 2.875" OD x 4.1" long. Material is copper. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Copper casting with brazed studs....
Ring es un Colada centrífuga situado en , , .
A buyer in Hong Kong, HONG KONG is looking to source 1 items (Casting)....
Looking for a spun cast cylinder. OD to be 13.875", height of 6". Thickness of 3mm. NO DRILLING REQUIRED. Buyer can drill and have provided the photos for reference....
A buyer in 广东 (Guangdong), CHINA is looking to source 1 items (Casting)....
Centrifugal casting of a cylinder sleeve. Approximately 4.900" OD x 8.675" long. Approximately 3.5 lbs. Please see drawing for dimension specifications. ...
Production of a pump rotor. Approximately 1.38" OD x 4.98" long. Please see drawing for dimension specifications. Current product is produced as a solid investment casting and is then machined with a thru hole and buffing operation. Buyer’s interest would be investigating other casting/ma...
Production of a plate. Approximately 752mm OD x 47mm thick. Casting & Machining. Please see drawing for specific dimensions....
Production of a barrel set: 81792681 1ea Barrel 6.50" OD x 4.00" ID x 13" long 81792699 1ea Barrel 8.00" OD x 5.00" ID x 13" long 81792707 1ea Barrel 9.50" OD x 7.00" ID x 13" 81792715 1ea Barrel 11.50" OD x 8.50" ID x 13" long 81792723 1ea Barrel 13.00" OD x...
Buyer needs a set of barrel: 81792640 Barrel 4.50" OD x 2.00" ID x 36" either/or 72" long 1 ea 81792657 Barrel 3.50" OD x 1.75" ID x 36" either/or 72" long 1 ea 81792665 Barrel 3.00" OD x 0.75" ID x 36" either/or 72" long 1 ea. Very simple parts....
Production of a simple centrifugal casting. Approximately 7.5" OD x 5.5" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a simple centrifugal casting. Approximately 9" OD x 6.5" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a simple centrifugal casting. Approximately 10" OD x 7" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a simple centrifugal casting. Approximately 11" OD x 8" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a magnesium alloy disk with 286mm overall diameter x 25.4mm thick. Please review the files attached. The disk must have smooth front and back sufaces, and must be dynamically balanced. Please quote from the attached files....
Production of a roller. Round hollow: 15" OD x 6" ID x 40" long. Tolerances OD: +.375" -0 ID: +0 -.375" length: +.625" -0. Please contact the buyer with any questions....
Production of a Casting part. Approximately 5.25" OD x 1.375" thick. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 5.25" OD x 1.25" high. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 5.25" OD x 5.25" long. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 4.25" OD x 1.125" long. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 6.312" OD x 7.25" long. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 6.312" OD x 9.25" long. Please see drawing for dimension specifications. ...
Production of a Casting part. Approximately 7.375" OD x 2.00" long. Please see drawing for dimension specifications. ...
Production of a centrifugal cast Turret Support Ring. Approximately 1250mm OD x 44.45mm long. Material is A36 carbon steel. Please see drawing for all specifications. Initial estimate needed immediately for blank or rough machined carbon ring, A36, 1010-1020, with final cost determined by final spec...
Production of flanged coupling parts (4 parts shown on drawing) to be cast out of steel (A36 equivalent). Drawing is the rough cast dimensions, no machining. Largest part approximately 16.75" OD x 9" long. Please see drawing for all specifications. ...
Production of a centrifugal cast BK754.01.115ring. Approximately 544mm OD x 33mm long. Material is AISI 304,321 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a centrifugal cast Bayonet. Approximately 468mm OD x 40mm long. Material is AISI 304,321 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
A buyer in Enumclaw, Washington, USA is looking to source 4 cast steel tubes. Buyer would buy 40,000 lbs per order to fill a container....
This is a very high value solicitation. Production of a bushing, sleeve. Approximately 9.254" OD x 18" long. ...
Buyer is in search of a manufacturer to provide an ongoing supply of small castings in Nickel Silver. Buyer will require this supplier to produce the castings from a wax master that will be supplied....
The material is copper alloy CDA932. Parts are centrifugally or continuous cast and then finish machined to print dimensions. Approximately 15.5 inch OD x 0.38 inc...
177LB. Manganese Bronze per UNS C86300. Approx 12.468" Dia x 8.468" long overall. Centrifugal Casting. Quote rough machining only, Contoured ID. X-Ray required....
Estimate duplication and manufacturing of a custom coin. 2 sided, 3-d designs. Prefer Bronze, but Sliver Pewter is acceptable 3.5" dia 3/8" thick Coin available for pattern duplication Back of coin possible redesign. List tooling charges and applicable lead times for tool production and casting....
Small (1"x .75") Shield cast in Pewter or Sterling Silver Shield must be convex. Cross on front of shield. Hole at top of shield to accept a small ring for hanging. Charm or pendant style jewelry piece. Mold/Patterns will need to be made....
Large tube shaped needed of 1045, cast via centrifugal. 20" OD, 16" ID, 62" in length....
Casting of Sink Roll Tube. Approx. 25.59" OD x 23.07" ID and 75.00" long. Please see drawing for complete dimension information. CF3M centrifugal cast tubes. ...
Casting of a stem sleeve-lower. Approximately 6.491" OD x 8.5" long. Please provide quote for the unfinished casting (0001.doc). Machining allowances are as follows. 1/8" larger on the O.D., 1/8" smaller on the I.D. and 3/4" longer. Please see drawing for specific dimensions. ...
Production of a nozzle. Approximately 55" OD x 60" long. Material is Inconel 625 or Inconel 718. Please quote per drawing provided. Buyer is also requesting material mechanical & chemical properties sheet. Please contact buyer with any questions....
Production of a bronze ring. Provide 15 initial centrifically spun bronze rings based on the finish sizes provided. Quote just the rough ring. The buyer will machine and finish the ring themselves. The buyer expects to purchase 100-250 within the next year....
Production of draw rings. Approximately 53.5" long x 36.0" wide x 2.50" thick. Please see drawing for complete dimensions. Big high strength aluminum bronze casting. The buyer is having this part quoted in multiple categories in order to find the most cost effective method of manufacturing. ...
Production of a casting tube. Approximately 10.563" long x 3" OD. Purchase complete per print spec....
Production of a simple centrifugal casting. Approximately 4" OD x 2" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a simple centrifugal casting. Approximately 4.5" OD x 2.5" ID. All lengths are per the die length. Please contact buyer with any questions....
Production of a simple centrifugal casting. Approximately 6" OD x 4" ID. All lengths are per the die length. Please contact buyer with any questions....