Triman Industries

Electronic Components & Devices shop, Fasteners & Hardware shop New Jersey, USA, Textile Distributor

Triman Industries, a foundation of Quality & Capabilities
  • Triman Industries was established in 1994 and is classified as a small business operating from a 20,000 square foot facility.
  • Approximately 70% of our core-business is conducted with our U.S. Government Department of Defense: the US Army, Navy, Air Force, Marines, Coast Guard, and Defense Logistic Agencies such as the Defense Supply Center Philadelphia, Defense Supply Center Richmond and Defense Supply Center Columbus.
  • Our customer base is strategically built from Original Equipment Manufacturers such as Lockheed, Boeing, Northrop Grumman, General Dynamics, Honeywell, and Raytheon.
  • Triman Industries processes approximately 10,000 customer quotation requisitions per month supporting approximately 15,000 line items immediately with the Defense Logistic Agencies and maintain a 99.9% quality rating with those Defense Logistic Agencies at the same time also maintaining a top supplier to the Defense Logistic Agencies under the DILNET (DLA Inventory Locator Network) and Blanket Purchase Agreement Programs rating.
  • Triman Industries is a certified ISO 9001:2000 and compliant to ASA-100 Revision 3 FAA AC 00-56.
  • Triman is NSEP approved; Naval Special Emphasis Program (NSEP) which administers to Critical Safety Items, Level -One, Sub-Safe and Navy Nuclear commodities - places requirements on NSEP approved facilities of a higher level due to the criticality of the particular product.
  • QSLD approved with Defense Supply Center Philadelphia.
  • Registered with Military Critical Technical Data Agreement Program.
  • Member of the Lockheed Technical Data Services Program.
  • Approved by General Dynamics Land Systems for self release.
  • Member of the GIDEP Program.
  • WAWF compliant and RFID and UID capable.
  • Registered with U.S. Department of State, Office of Defense Trade Controls Compliance for exportation.
  • DCMA has a permanent Quality Assurance Representative (QAR) stationed at our facility to inspect product.
  • Maintain state of the art inspection equipment including Johnson Gauge Thread View Vision System and Brown & Sharp Coordinate Measuring Machine.
  • Inspection capabilities include System 23 and System 22 thread inspection
  • (Higher level of inspection for both internal & external threads).
  • Currently maintain approximately 300,000 different items in our inventory, which we advertise globally. 
  • Perform in house packaging and ship in accordance with military specifications.

 

 

 

 

SPECIALISTS IN FASTENERS & ELECTRONIC COMPONENTS
Standards to: AN-MS-NAS-NASM-SAE

 

Fasteners

Lock washers
Nuts
Washers
Machine Screws
Dowel Pins
Mounts

Springs
Rubber Grommets
Blind Rivets
Clamps
Set Screws
Cap Screws

Cotter Pins
Bolts
O- Rings
Casters
Seals
Threaded Rod

 
 Hardware Catalog.

 

 

Materials      

  Aluminum - All Alloys - Brass - Copper - Monel Stainless Steel - Steel - Inconel

 

              

   Electronics   

SEMICONDUCTORS
ADVANCED MICRO DEVICES
AGILENT TECHNOLOGIES
ANALOG DEVICES
ATMEL
CYPRESS
DIODES INC
FAIRCHILD
GENERAL SEMICONDUCTOR
HITACHI
INTEL
INTERNATIONAL RECTIFIER
LITE ON
MAXIM/DALLAS
MICROSEMI
NATIONAL
MOTOROLA
NEC
ON SEMI
TEXAS INSTRUMENTS

 

 

CAPACITORS
AVX
MALLAORY
UNITED CHEMI-CON
KEMET

RELAYS
MAGNECRAFT
OMRON
POTTER & BRUMFIELD

CONNECTORS
ALPHA
AMP
AMPHENOL RF
AMPHENOL AEROSPACE
AREIS
AUGAT
CINCH
GLENAIR
METHODE
POMONA
SWITCHCRAFT

CIRCUIT BREAKERS
BUSSMANNN
EATON
POTTER & BRUMFIELD
TEXAS INSTRUMENTS

RESISTORS
CLAROSTAT
OHMITE
VISHAY

INDICATOR LIGHTS
DIALIGHT EATON
GRAYHILL

WIRE/CABLE
ALPHA
AMP
BELDEN
MANHATTAN
OLYMPIC

SWITCHES
ALCOSWITCH
AMP
C & K
DIALIGHT
EATON
GRAYHILL
HONEYWELL
ITT CANNON
MALLORY
OMRON
TEXAS INSTRUMENTS

CABLE TIES
AMP
TYTON

FUSES
BUSSMANN
LITTELFUSE

LAMPS
GE
MICRO LAMP

 

 

Triman's Inspection and Test Service Capabilities

 External Thread View Vision Inspection System

 

  • This system represents the state-of-the-art inspection of External Threaded Products.
  • Provides external thread inspection and certification to System 23 Element Method.
  • Inspection of gages; Master Set Thread Plugs, Work Plugs, Plain Diameter Plugs, and X and W tolerances for Threaded Plug Gages.
  • English or Metric profile
  • Size from 0.0600 inches thru 5.00 inches diameter (or equivalent metric)
  • System meets all calibration specifications and measurement requirements; ASME standards, ISO standards, and US Military standards.
  • Non-contact optical measurements insure product integrity during the inspection process.
  • Fully automated system provides reliability, repeatability, accuracy, and process control.
  • Computer generated calibration and measurement product reports and gage certifications provided for each inspection  

Additional Inspection and Test Services offered by Triman Industries

  • Coordinate Measuring Machine: Utilizing our CMM we offer an inspection service able to handle a work piece up to 18”W x 20” D x 16” H; providing detailed reports of the inspection along with computer generated printouts of the features measured.
  • Thread Inspection to System 22 Single Element Method: All of the thread elements and characteristics necessary to insure the integrity of assembly and those called out in  (FED-STD-H28, MIL-S-8879, MIL-S-7742, ASME B1 series) specifications, will have detailed reports of the features measured.
  • Mechanical  Inspections: Performed using all calibrated instruments as regulated through our ISO certified calibration system. Other instruments used for testing are a Hardness Tester for superficial hardness testing and an Optical Comparator equipped with both 10x and 20x lens. Inspections will be supported by full inspection and test reports.

 

 

 

 

Triman Industries Military Specification Packaging

 

Featuring a full line of military specification packaging and documentation services:

  • Quality Control approved by DCMA Philadelphia (Defense Logistics Agency).
  • Packaging Methods to MIL-P-116 and MIL-STD-2073.
  • Marking, Labeling and Documentation comply with MIL-STD-129 and LOGMARS bar-codes.
  • Government Source Inspection with a resident DCMA Quality Assurance Representative.
  • ISO 9001-2000 Certified Facility and Quality System

 

 

 

 

Packaging Services Inquiry Form 

EMAIL:   pack@trimanindustries.com

 

  • Specializing in small parts and small run packaging

 

  • Contract Military Packaging
  • Specialized Commercial Packaging
  • Direct Shipment to The Customer
  • Government Source Inspection
  • DD250 Preparation and Distribution
  • Packaging and Preservation
  • Customized Crating and Palletizing
  • In House Bar Coding
 
 
 
 
 
 
 

 

         

 

 

 

 

 

 Pouch Machine Packaging  - For small part packaging

Capacity and Size Parameters (for Packing Machine)

 

  • Material Types

Mil-B 121-F, Grade A, Type 2, Class 1 Poly Kraft

 

Mil-PRF-131, Class 2 Poly Kraft w/ foil inside

  • Product Height

Approximately 5/8 inch maximum height (thickness)

  • Pouch Width

4 ½ inch to 13 ½ inch in width  

  • Pouch Length

4 ½ inch minimum through 24 inch (approx.) maximum  

  • Product Weight

Approximately 6 ounces (maximum) per pouch  

Basic Package Formula (for Packing Machine)

  • Package Width (Inside) plus seals and seams: Item width plus 4 times the item height
  • Package Length (Inside) plus seals and seams: Item length plus 4 times the item height
  • Seals and Seams: approximately 3/8 inch in width (all 4 sides)  

EXAMPLE

If product size is 2 inch wide x 3 inch long x ½ inch high then the inside of the pouch will be, 4 inch wide x 5 inch long. Outside of the pouch will be 4 ¾-5 inch wide x 5 ¾-6 inch long. Seam allowance is approximately ½ inch on all 4 sides of the pouch.


 

A TRIMAN ADVANTAGE 

Preparing military packaging for more than 10 years. Triman has the Experience, Location, Resources, Quality Control, Rapid Turn Time and Cost Effective Competitive Pricing to handle your packaging needs!

Our extensive expertise in military packaging allows us to help you save money and improve the efficiency of your shipments. Plus, our highly experienced staff can assist you in methods of processing your products to the government most effectively.

Make Triman your packaging of choice. Submit our Packaging Services Inquiry Form now to begin the process.


MIL-SPEC PACKAGING

Mil-Spec packaging has been a Triman specialty for more than 10 years. We consistent at meeting and complying with mil-spec packaging standards, including:

  • Ø       Mil-Std 129     
  • Ø       DD250
  • Ø       Mil-Std 2073    
  • WAWF

Our mil-spec packaging services act as a complete packaging interface between your company and the U.S. military. Contact us so we can put our mil-spec packaging experiences and services to work for you.

We manage the paperwork and inspections required of all mil-spec packaging, providing you with a complete Quality based service...complimenting what you know and manage best - - Your Business.

 

 

Triman Industries, The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience

This company has elected to not display their ratings.
  • West Berlin, New Jersey
  • USA 08091-9164