Saddle Block

This RFQ was sourced on in USA for Ceramic Mold Casting

Production of a Saddle Block. Approximately 9.996inch x 2.746inch x 2.0inch. Cast from 6063 or similar aluminum. Part weight is 1.56 lbs., surface area is 116.971 square inches, volume of component is 15.962 cubic inches. Sand lightly top surface, grain along the length. Hard clear anodize coating. Component has 3 threaded holes (3/8-16.). Locations of holes on top are 9.00" on center and is critical.

Buyer Information

Industry Engineering and Design
City/Region Riggins, Idaho
Country USA


RFQ Number 667685
Material Aluminium
Material Grade 6063

Technical Specifications

Category Ceramic Mold Casting
Dimensions 10x2x2 inch

Get quotes online for manufacturing services at from machine shops, fabricators, job shops and contract manufacturers. connects buyers and suppliers when the buyer has a need and the supplier has the right expertise and capacity. analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience.

Ceramic Mold Casting: Ceramic molds are made at ceramic mold companies. Making a ceramic mold is similar to making a plaster mold except that pouring a ceramic-based slurry mixture over the pattern makes the ceramic mold. The mold is allowed to set to a rubbery consistency then the pattern is removed. As with plaster mold castings, a ceramic mold casting can produce parts with smooth finishes, slender sections and fine details. Parts made as a ceramic mold casting can be very small or up to several tons and can maintain small tolerances.