Login to your MFG.com Marketplace account
Find the perfect manufacturer to make your RFQs or assembly.
CNC routing and drilling on one side and drilling only on the other. Also looking for finishing, including sanding and polyurethane. Approximately 60" x 60" x 0.75". Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a CNC routed set. Please see included RTF file and drawings. In short this is two sheets worth of high tolerance routing. Please note the buyer may award the RFQ early if they get a quote they like....
Production of a shell. Small part approximately 3" x 1" x 1"). Only a quantity of 1 needed initially. Precision milling/routing of depth up to 2" and cut diameter of approximately 1/4"....
Production of an office product assembly. The plastic is 1/8" 3030M acrylic and the wood is 3/8" baltic birch. This RFQ is for the finished product including all parts, assembly and packaging. ...
Buyer is looking for a supplier to manufacture their plywood tops....
2 carved clapping hands per set. Measuring approx. 7" x 4" x 3/4" & 7" x 4" x 1/2". We will provide patterns. We would like to get two different quotes. 1. Commodity grade finish - run on the CNC and packaged packaged. 2. Finished with low lustre lacquer (10 - 20 degree) and bulk packag...
Production of a melamine table top. Approximately 23.75" square x 1.25" thick. Please see drawin for specific dimensions. Please see RFQs 55359 and 55385 for other woodworking parts....
Production of cross-cut channel. Approximately 23.75" long x 3.25" wide x 1.25" thick. Please see drawing for specific dimensions. Obtain quotation. Please see RFQs 55359 and 55384 for other woodworking parts....
Production of a Turkey Call Kit- Cherry. This quote is for a kit. Parts are cut and sanded only in Solid Cherry. Spring and wood screw should be included (this is not clear on the print, it is used to hold the lid on the box once the end user assembles the kit)....
Production of a Turkey Call Kit- Walnut. This quote is for a kit. Parts are cut and sanded only in solid Walnut. Spring and wood screw should be included (this is not clear on the print, it is used to hold the lid on the box once the end user assembles the kit)....
Production of a Turkey Call Kit- Poplar. This quote is for a kit. Parts are cut and sanded only in Solid Poplar. Spring and wood screw should be included (this is not clear on the print, it is used to hold the lid on the box once the end user assembles the kit)....
I need 12 of the following: 132" x 2.75" MDF, 1/4 inch thick. There also needs to be a 1/8" x 1/8" route the length of the board, 1/8" in from one side, and 1/4" from the other -- one face only....
Production of a rudder. Approximately 24" long x 7" wide x 0.5" thick. This is a varnished wood rudder board having a 1/4" radius around edge and a drill hole. Please refer to drawing for further detail....
Production of a north rose (see PDF for 3D view, use DWG or DXF. 3 Axis router needed / can be made in sections and/or layers. (2D DXF can be provided if made in layers) Please quote on all the buyer's open RFQs....
Production of a Beam Mirror (see PDF for 3D view, use DWG or DXF. 3 Axis router needed / can be made in sections and/or layers. (2D DXF can be provided if made in layers) Please quote on all the buyer's open RFQs....
Production of a beam (see PDF for 3D view, use DWG or DXF. 3 Axis router needed/ can be made in sections and/or layers. (2D DXF can be provided if made in layers) Please quote on all the buyer's open RFQs. ...
Production of a Side Panel (see PDF for 3D view, use DWG or DXF. 3 Axis router needed/ can be made in sections and/or layers. (2D DXF can be provided if made in layers) Please quote on all the buyer's open RFQs. ...
From plank lumber (approximately 9/16" thick x 7 1/2" wide x 7 1/2" high) cut out, drill center and round over (1/8"R) a mildly intricate shape. See attachment. Dimensions subject to adjustment to facilitate manufacturing process. ...
We think this needs to use a CNC machining process but your suggestions are welcome. Approx 10.5" Dia x 1/4" thick overall. We would like to know if the quote includes sanding the final product....
Production of a table top. Approximately 23.81" square x 1.3" thick. Please see drawing for specific dimensions. Obtain quotation. Please see RFQs 55384 abd 55385 for other woodworking parts....
Walnut bases for trophies. See picture attached. Base is 11 3/4" x 5 3/4" x 3/4" thick with 3/16" roundover top edge. Two coats laquer finish on top and sides, one coat on bottom....
Production of a slotted wood console to be flat packed. Approximately 96" x 35.5" x 15". Please see drawing for dimension specifications. Baltic plywood ...
Production of a carrier. Part is approximately 12" x 5" x 1.5". The part is ideal for a CNC router. Finish sand to 120 or better and spray interior polyurethane or equiv. Please see drawing for dimension specifications. ...
Production of a seat dip and back dip set. To router(5 axis) solid wood parts for a chair. This is for a prototype, if successful will be be looking to manufacture a small batch (20-30 chairs). Please quote from the attached drawings....
Production of a frame. CNC routed MDF panels, Total of 47 (4’x8’) Sheets. Custom tooling required. Cleanup sanding. No assembly/finishing. Please quote from the attached DWG....
Production of an interior, free-standing, hinged screen. Approximately 71.125" x 66.125". Please see drawings for specific dimensions....
Production of a routed monome case. Approximately 184.15mm x 184.15mm x 30mm. Please make from walnut. Must be finely finished. Please quote from the attached files....
Form Die for PVC Pipe. Buyer can supply material. Approximately 16.125 inch x 3.5 inch x 1.5 inch....
Production of an outdoor wood frame set. The buyer needs wood pieces manufactured from Teak, Shorea or Redwood. Please quote in sets. Each set consists of (2) Long Stringers, (2) Long Legs, (2) Short Legs, (1) Short Stringer, (1) Front Stringer. ...
Thickness is approximately 1 inch at highest point. Length of wooden mold part is 9.5 feet. Height is 2 3/8 inches. Buyer has samples to provide. These wooden moldings are used to make display cases for sports. In search Brown, Black, Mahogany and Boardroom Mahogany. Please contact the buyer throug...
Thickness is approximately 1 inch at highest point. Length of wooden mold part is 9.5 feet. Height is 1 5/8 inches. Buyer has samples to provide. These wooden moldings are used to make display cases for sports. In search Black and Natural. Please contact the buyer through MFG.com with any question...
Round wood handle with steel ferrule. Diameter is 3/4". Length is 5". Rectangular hole centered in shaft at ferrule end is 9/32" x 1/4" x 2.0" deep. Ferrule is .40" long with rolled end and snug crimp....
Thickness is approximately 1 inch at highest point. Length of wooden mold part is 9.5 feet. Height is 1 5/8 inches. Buyer has samples to provide. These wooden moldings are used to make display cases for sports. In search Brown, Black, Mahogany and Natural. Please contact the buyer through MFG.com wi...
Thickness is approximately 1 inch at highest point. Length of wooden mold part is 9.5 feet. Height is 2 3/8 inches. Buyer has samples to provide. These wooden moldings are used to make display cases for sports. In search Brown, Black, Mahogany and Boardroom Mahogany. Please contact the buyer through...
The buyer is looking to source wooden dowels. The size is 20" long and 1/2 inch in diameter. This would also need a 5/16th hole bored in the center of the length....
The buyer looking to source wooden dowels. The size is 2" long and 1/2" diameter. This would also need a 5/16th hole bored no greater than half the diameter at 1" in from both ends....
The delivery date is flexible. Production of a desk. It should be built of a 1/2" (12mm) "B" grade Birch plywood. Parts B, C, & D are to be coated with a clear polyurethane after being cut out....
CNC Routing of nested detail parts. Finished parts are stackable, and aligned using 1/4" dowels. (9 holes in each detail) These parts need to be precisely fabricated, but will not be inspected. Alignment and fit are the passing criteria.F Details are nested in a 4’ X 8’ Sheet. (nominal) ...
Production of CNC Machined Wooden Charing Base (Routing & Drilling). Approximately 19.0 inch x 15.0 inch x ...
Production of a Cork faced Plywood Table (Routing & Drilling). Approximately 775.0 inch OD x 440.0 inch long. Please see drawi...
HIGH DENSITY FINE GROUND GRANULATED CORK. SAW OR ROUTER CUT PROFILE AND RADAII. SAND TO REMOVE MANUFACTURING MARKS. SEAL WITH CLEAR WATER-BASED CORK SEALANT (ODOR FREE) Production of a shaped cork block (Routing & Drillin...
Production of CNC Machined Wooden Charging Base (Routing & Drilling). Dimensions 17.0 inch x 13.0 inch x ...
Routing and drilling of a Cross Wood Puzzle. Material is (3) different types of wood. Approximately 15.59 inch x 11.73 inch x 1.5...
Production of a Wood Rail (Routing & Drilling). Approximately 39.813 inch x 3.794 inch x 0.875...
Production of a housing. Please see drawings for dimension specifications. Mill attached parts from 0.5" MDF (CNC routing assumed). Parts inner_baffle and outer_baffle will need to be machined from 0.125" plastic, any type should work. Assembly and painting are also desired. If supplier ca...
Production of a routing/drilled Base Top. Approximately 49.7679" x 49.3375" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and mela...
Production of a routing/drilled Wood D. Approximately 32" x 21.75" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and melamine ...
Production of a routing/drilled Wood A. Approximately 32" x 23.845" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and melamine...
Production of a routing/drilled wood B. Approximately 32" x 23.845" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and melamine ...
Production of a routing/drilled Wood C. Approximately 32" x 21.75" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and melamine ...
Production of a routing/drilled Base Bottom. Approximately 49.7679" x 43.3013" x 0.75". Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and m...
Production of a routing/drilled Wood O. Approximately 16" OD x 0.75" long. Please Quote: 1) Particle Board with melamine 2) Plywood with laminate Color X shall be similar to Abet Laminate 851 Color Y shall be standard black Finish shall be mat for laminate and melamine T...