Login to your MFG.com Marketplace account
Find the perfect manufacturer to make your RFQs or assembly.
Buyer is in search for some Solar Cells - 4in x 4in or smaller....
Buyer is looking for monocrystalline PV cells....
A buyer in Emporia, Kansas, USA is looking to source an Omron photo eye....
A buyer in Piemonte, ITALY is looking to source 1 parts (Electronic Components & Devices)....
Buyer is looking for a source for triple junction solar cells. These are photovoltaic cells. Comparable to those cells made by Spectre Labs owned by Boeing. Prefers 1" wide by variable length. They are flexible on what is provided by the supplier....
Buyer needs a 5 Watt solar panel in an aluminum frame similar to the one in the link in the attachment section....
Buyer is in search of Encapsulated Solar Cell. 1.5 volt, 500mA resin encapsulated solar cell. Approximately 9cm x 6cm....
Please provide quote on all solar modules 190W - 300W to be delivered to the US. Prefer modules to be produced outside of China and Taiwan because of tariff issues or quote will need to be DDP. Please contact Buyer with any questions and submit your pricing via attachment...
We are looking manufacturer and supplier of solar cells in monocrystalline and polycrystallineof Pm> = 2.5 Wp / cell, preferably 125 mm x 125 or even several measures and wp.Forecast supply...
Looking for mm.156x156 3bus bar multicrystalline SOLAR CELLS, delivered, customs cleared destination address. Please find a datasheet as reference It is assumed the supply of 150,000 units per month . Please provide all tech...
Buyer is in search of a stack of 6 NiMH Battery Cells packaged as shown in the attached drawing. The cells are 4/3 FAT A cells, with a capacity of 4000 mAhr....
The buyer is looking for 4-AA-cell flat pack NiMH rechargeable battery packs with a Molex connector #51021-200. The cells will be standard 1.2v cells, not the 1.5v noted in the data below (1.5v was the closest thing on the list of choices) Sanyo HR-3U cells are what they have in mind. Equivalen...
57 3/4" long, 6" wide, slit scored down center creating equal 3" halves. 3/4" cells. This product could be used in many of our facilities located throughout the US ...
Machined piece of Optically Clear Cast Acrylic - Overall dimensions 2.125" x .875" x .080" thick - tolerance on thickness dimension is +.033 / - .038 - Material information was obtained from the McMaster Carr catalog - Piece is machined into an "L" shape - two .136" dia thru holes ...
Buyer is in search of an aluminum honeycomb. Approximately 3225 mm x 1675 mm x 46 mm sandwich panel, cells size 19 mm. Top and bottom skins are 3 mm thick. Top skin is black anodize coated, inorganic pigment. Border frame is made from 40 x 40 mm. Aluminum profile 4 mm thick. Working temperature up t...
Production of a BATTERY PACK (28 C CELL). Pact consists of 28 Non-Rechargable primary "C" cells....
Seeking a Rough Order of Magnitude for labor, materials and shipping to fabricate a battery stick. Each battery stick consist of six D cells spot welded in series as shown in the attached photos....
6061 aluminum mounts for bearings, cylinders, & load cells. Ok to leave parts at stock thickness....
6x 18650 cells in a 3 series, 2 parallel arrangement. Stacked in two columns of 3, shrink wrapped and wired with both standard balance connector JST-XH and output power connector (20 gauge wire, Molex mini-fit jr long to connector) The cells used should be at least 3.6 V nominal, ...
Production of an anode splitter manifold. Laser cut 5mm plate to size with simple holes and passageways. Tightest tolerance is +/- 0.10mm (positional) and +/- 0.025mm on two hole diameters. Material is Crofer 22 APU and will be supplied by buyer - refer to data sheet for additional information...
Production of an anode splitter top cover. Laser cut 1.5mm sheet to size with 8 simple holes. Tightest tolerance is +/- 0.10mm (positional) and +/- 0.025mm on two hole diameters. Material is Crofer 22 APU and will be supplied by buyer - refer to data sheet for additional information. Material...
Production of an anode splitter cover. Laser cut 1.5mm sheet to size with 10 simple holes. Tightest tolerance is +/- 0.10mm (positional) and +/- 0.05mm on two hole diameters. Material is Crofer 22 APU and will be supplied by buyer - refer to data sheet for additional information. Material supp...
We will furnish the battery cells....
Looking to source HIGH QUALITY Li-Ion cells in 18650 size, 2000+ mAh, 3.6-3.7V. Please quote price with and without solderable metal tabs....
Production of a Chip Stick. Item is a flat device that takes in cellular media and through a micro ejection process allows cells to be processed with transfection....
This part is to assemble battery cells as a heat sink/capture plate. The part is to be made from Aluminum 6061 T6 provided by the milling shop. Tightest tolerance is 0.003" [0.076mm]. Approximately 58.5724 mm x ...
ALUMINUM HONEYCOMB SHEET 127"L X 65"W X 4"T 1/4" CELLS ***CAN BE PROVIDED IN 3 SECTIONS 42" X 65"***...
Fabricate two pcs of 36in dia steel exhaust pipe from engine test cells. Pipe to be underground(need corrosion resistant coating on outside)...
The Solar cells could be mono or poly crystalline type Size: 102.5mm x 102.5mmx Thichness( 350microns ) Maximum Power: 1.62W ( +/- 1.2% ) Current At Maxumum Power: 3.15Amp ( +/-3.0% ) Voltage at Maximum Power: 0.524V ( +/-2.5% ) Short Circuit Current: 3.4Amp ( +/- 3%) Open Circuit voltage: 0.54...
Production of a top and bottom case. Machine out of Ultem. The buyer needs twelve parts immediately. They have made these on a CNC and accurite programs are available for those that would be interested, and the buyer would be inclined to support that software if it can save their project some m...
Production of a shaft. Approximately 1.50" OD x 15.50" long. Please see drawing for dimension specifications. The part is a component of a laminating machine for fuel cells. See attachment for exact geometry, dimensions and notes....
Production of a harmoniglo 2. Approximately 28.5mm x 9mm. This is basically a small flashlight, comprised of plastic housing, button cells, and LED. Buyer needs complete product. Please see drawing for details. Please contact Buyer through MFG.com messaging system with any questions. All compone...
Buyer is in search of Sony Fukushima SEW US503759 A8H Lithium Polymer Cell. Production last three month....
Panasonic UR 18650FB 3,7V The overall dimensions are approximately 18.3mm OD x 64.9mm Length....
Buyer is in search of some Sanyo eneloop AAA NiMH battery cells. low self-discharge, charge to =>85% prior to ship all parts per shipment from same batch or run The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer will notify all quoting pa...
Wall charger to charge 11.1v 3 cell pack of 18650 Li-ion cells at 2.2ahr each. Must allow for 110 to 240v AC input, UL, CE, Australian approval, ROHS, interchangeable blade kit. Requires custom output cable to connect to battery pack - molded 4 pin connector - cable available for $0.79 from China- ...
The buyer is looking for 500 mAhr battery in very small - OK to quote with stock coin cells package size - looking for stock cell size that is close to print size, but OK to not match exactly - cell material TBD - looking for smallest package size possible with longest cell life possible....
Production of components for a Plastic Bottle Testing Apparatus. Buyer would like a comprehensive quote for all of the 8 major components with a cost breakdown of each (3 Caps, 3 Testing Cells, 2 Base Plates)....
Buyer is in search of a 7.4V, 500mAh LiPo Rechargeable Battery, with an internal protection circuit. Battery contains two cells and must fit into a 60 x 30 x 16 mm space. Battery must also meet IEC 62133....
Buyer reserves the right to award early due to short lead time. Please submit your quote early to ensure you are considered. AR Glass (Anti-Reflective Glass) with low iron content for use with solar cells.It's a simple 1Ft Square with chamfered edges. Thickness 3 to 3.2 m...
Production of a Foam Insert for holding battery cells in place in a battery case. Prefer stiffer fire resistant foam that is darker grey or black. Approximately 15.625 inch x 10.918 ...
Buyer is looking for two separate batteries of the following details: Battery 1: Our part number: 110-00004Cells: 2-cell (7.4V)Capacity target per cell: 484mAh...
Quote the manufacturing of LightHead1, encapsulating the PCBA subassembly in hard polyurethane (similar to SmoothCast200), in aluminum molds under vacuum (autoclave pref.). Must utilize existing mixing system/applicators for the encapsulant, assuring low-blemish smooth clear curing. Mold design c...
We are seeking companies involved in the manufacture of Compressed Natural Gas tank fuel cells. Interested companies that are competeting in supply of CNG tanks to the automotive industry are strongly encouraged to reply. Attached is a current manufacturers print of the tank and its co...
Production of a Engineering Services Prototyping. Approximately 1.5" OD x 3.032" long. Material is Tool Steel steel. Please see drawing for all specifications. Our lab has developed a simple way to improve the performance of solar photovoltaic cells by redirecting the light otherwise lost by reflec...
This part is the body of a small tank that will contain a solution of methanol and water. Typical plastic materials for fuel cells can be used, preferably black HPDE. Approximately 11.232 inch x 8...
Production of a molded 16v1100 battery case. Material is Premium plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Please contact Buyer with any questions. Supplier must have battery case experience and samples. Looking for an AGM bat...
Discharge Tray Summary This product will be used to discharge sub-c NiMH batteries that are assembled in series using a side by side configuration. This unit will discharge each cell in the pack individually to a predetermined cutoff voltage and provide data about each cell us...
This is a new design for a flashlight that requires the supplier to provide the housing design. We only expect a workable housing with our special wiring design included inside the housing to connect to our patented electronic module. The patent # is 6,570,340 and allows a method to get more...
Buyer is in search of a Weather radar (ACSOPRI-E). Technical Characteristics: Range of 200 km., Equipped with a C.L.P.P.I monitor system. Main components of the radar are as follows: Antenna-feeder system with high-accuracy system of the antenna azimuth and elevation angle positio...
The motor should use ball bearings and our end users should be able to open the motor and rebuild it using new bearings and/or a different rotor which the buyer may choose to develop in the future. This motor should be not be designed to incorporate a sensor. The buyer's logo would need to be molded...