Login to your MFG.com Marketplace account
Find the perfect manufacturer to make your RFQs or assembly.
Buyer is in search of Square Plastic End Caps required for steel tube parts product....
Buyer is in search of Plastic End Caps. Approximately ½” in length closed on one end, with an inside diameter to fit snug over a 5/16” diameter strut....
Buyer is in search of Caps for Aerosol Can. Buyer uses Single Shell (NIH-Necked in Hook) cap in three sizes. Buyer requests pricing for both PP (polypropylene) and PE (polyethylene) materials....
Buyer is looking for a manufacturer of 5 gallon bottle caps. Buyer does not have technical drawings, etc. - Buyer is looking for a company that already produces these.Specifications:Colours: Red and BlueWeight: 12 grams (or very close)Material: PE - LD...
THERE ARE THREE DIFFERANT SIZE CAPS TO QUOTE.QUOTE TOOLING CHARGES SEPERATE...
4 chrome finished bespoke metal caps to be fitted to wooden sofa legs 2 of the caps are the same, 2 are different, 4 caps in total Buyer gets this type of work on a regular basis and is looking for a reliable supplier with short lead times for future collaboration....
There are three differant sizes of caps (3 RFQs). Please seperate out any tooling costs and pricing fo r each size...
GE Nuclear Energy 6/18/03 REQUEST FOR PRODUCT ITEMS MUST MEET EXACT SPECIFICATIONS OR EXCEED ITEM: STEEL BAR WITH END CAP PLUGS 10’ X 12’ RL BAR .290” +/- .010” DIAMETER CAPS OPTIONS: A. SMALLER DIAMETER AS LOW AS .268 B. LARGER DIAMETER C. UNLIMITED QUANTITY D. STAGNATED D...
Buyer currently use a spun steel cap (747021-P) that is modified in their shop. They are looking for a new source for this part and also compare in-house modifications to vendor modification costs. They will be awarding either the 747021-P or sets of 747021-T and 747021-B....
Buyer is looking for 150 brass or other metal that will not rust caps. These will thread on a 1/2" pipe. Will need 1/8" hole drilled in top and beveled....
Part is a round flat plate approx 17" Dia x 3/16" thickness of 316 stainless steel. Eight pocket evenly spaced to guide metal caps into a capping head....
Production of an inlet housing end cap. The Inlet Housing End Cap has an approximate size of 11.59" OD x 1.42" thick. The tightest tolerance is +/- .001". All geometry do not have to be stamped. Feeatures can be machined. It is preferred that quotes account for additional costs for secondary m...
Production of a milled / turned CAPS Metal Insert. Approximately 14.91mm OD x 8.46mm long. Material is 300-series stainless steel. Please see drawing for all specifications. The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer will notify all quotin...
THIS IS A NEW RFQ REPLICATED FROM RFQ 145065 PLEASE SEND YOUR QUTOES BY 11/13, DELIVERY IS CRITICAL BY 11/21 PER OUR DISCUSSIONS. Production of a milled / turned CAPS Metal Insert. Approximately 14.91mm OD x 8.46mm long. Material is 300-series stainless steel. Please see drawing for all specific...
Buyer is in search of glass bottle with re-sealable cap 4-6 fl. oz capacity. Caps need to be attractive/decorative (silver colored metal preferred). The bottles will be holding wine. Also need a metal box with lid approx size 2" diameter by 2" high. 40 pieces of each are needed for concept work....
Unterteile spezial is a Milling & Turning in , , .
Production of a housing end cap set. This RFQ is for two end caps- Inlet Housing End Cap and Outlet Housing End Cap. For the Inlet End Cap, the approximate size is 11.59" OD x 1.42" thick. The Outlet End Cap has an approximate size of 11.77" OD x. 1.77" thick. The tightest tolerance is +/- .001"....
Turned Steel Caps. Approximately Dia (.079 inch) 2mm x H (.025 inch) .62mm. Material is a 416 Stainless Steel....
Production of a screwcap, nutcap, or roundcap and seat is a system comprised of a threaded washer or seat which is clamped under the head of a screw or nut, and a cap which is screwed onto that threaded washer to cover the head of the screw, or nut and screw end with an attractive rounded surface. ...
Production of a screwcap, nutcap, or roundcap and seat is a system comprised of a threaded washer or seat which is clamped under the head of a screw or nut, and a cap which is screwed onto that threaded washer to cover the head of the screw, or nut and screw end with an attractive rounded surface....
Production of a screwcap, nutcap, or roundcap and seat is a system comprised of a threaded washer or seat which is clamped under the head of a screw or nut, and a cap which isscrewed onto that threaded washer to cover the head of the screw, or nut and screw end with an attractive rounded surface. ...
Turned Steel Caps. Approximately Dia (.079 inch) 2mm x H (.025 inch) .62mm. Material is a 416 Stainless Steel. Please see drawing for all specifications and contact Buyer through the MFG.com messaging system with any questions regarding this RFQ. ...
I need to have thin walled metal caps made for a switch that is attached to a projectile. I need to have thin walled metal caps made for a switch that is attached to a projectile. I need these to be somewhat cheap as they will be single use items that will be destroyed on impact. ...
I need to have thin walled metal caps made for a switch that is attached to a projectile. Approx size:.843" long x .726" Dia. I need these to be somewhat cheap as they will be single use items that will be destroyed on impact. I will also need some type of tool to crimp thes...
Production of a metal end cap set. Approximately 13.5" long x 9.6" wide x 0.5" thick. Stamping per dwg. ESK-23296. Please note there are 2 end caps per set. They are mirror images of each other....
The buyer needs these logo caps to be chrome plated. They are made from ABS plastic in Tucson AZ. The buyer does not want the pieces to go overseas, However Mexico is O.K. Approximately 0.422" hex x 0.382" long. Please see drawing for specific dimensions....
Buyer is looking to have some folded metal parts made out of thin sheet Clear 2 anodized aluminum. There are 2 parts, a left and a right. "Quote quantity" is for both left and right combined, so a quote for 100 would be a quote for 100 left and 100 right.Aluminum parts are not structu...
PLEASE NOTE: Powder coating is optional on these parts. Please note on the quote whether the quote includes powder coating or not....
A buyer in Silver Bay, Minnesota,USA is looking to source 1 Stamping parts. We are looking for a supplier to produce stainless steel dust caps from 16ga sheet metal as shown in the attached print....
Production of bar end caps. Approximately 1.24" OD x 0.50" long. Please see drawing for dimension specifications. Aluminum caps with a hole for a set screw....
Production of a screw machined 1/4 inch Unthreaded Screwcap. Approximately 0.63" OD x 0.268" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head impr...
Production of a screw machined 5/16 inch Unthreaded Screwcap. Approximately 0.69" OD x 0.315" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head imp...
Production of a screw machined 3/8 inch Unthreaded Screwcap. Approximately 0.75" OD x 0.348" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head impr...
Production of a screw machined 1/2 inch Unthreaded Screwcap. Approximately 1" OD x 0.444" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head improvi...
Production of a screw machined 5/8 inch Unthreaded Screwcap. Approximately 1.25" OD x 0.524" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head impr...
Production of a screw machined 3/4 inch Unthreaded Screwcap. Approximately 1.5" OD x 0.604" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head impro...
Production of a screw machined 1 inch Unthreaded Screwcap. Approximately 1.88" OD x 0.78" long. Material is 303 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. An unthreaded Screwcap is a metal cap that fits over a screw head improvi...
Production of a turned 1/2 inch Long Nutcap and Seat. Approximately 1.125" OD x 0.921" long. Material is 303 Stainless Steel stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Production of a screwcap, nutcap, or roundcap and seat is a ...
Production of a screwcap and seat. Approximately 0.75" OD x 0.938" high. Please see drawing for complete dimensions. Description: A Screwcap is a device comprised of a threaded washer or seat, which is clamped under the head of a screw or nut, and a cap which is screwed onto that t...
Production of a chair glide: neoprene bootie bonded on a nickel or zinc plated steel cap. Round steel cap of 1.125" diameter. Total height of glide 11/16". Neoprene rubber to be casted and inserted into steel cap. Dome shaped rubber part has round opening of 5/16" on top and an sphere 7/16" diameter...
We are looking for a manufacturer who is capable of doing plastic injection molding and product assembly on a large scale. Your non-binding quote will be preceeded by a confidentiality and non-disclosure agreement from your sources. We will be...
The catch tray is designed to be used witha metal strip designed to open several beverage bottles simultaneously. The catch tray captures the removed caps as they fall away. I assume injection molding is the best way to fabricate this piece, but I...
Please find attached a AutoCad.dwg file of an exstusion. It can be modified according to standard industry practices concerning wall thickness, cornering, reenforcing for rigidity, rubber wiper containment or any other suggestion proposed for easy of tooling....
I am looking to have thin walled metal caps made for impact testing. These pieces act as covers for a trigger switch of a certain projectile. I need to keep these parts somewhat cheap as they will be single use items that will be destroyed on impact. I will also requi...