Insulator, Bushing

This RFQ was sourced on www.MFG.com in USA for Ceramic Mold Casting


Degree of Difficulty: LOW - Production of a Striker point bushing (ceramic) will call for: L = 1.094", Head diameter is 0.610", shaft diameter is 0.355". Part has countersink hole with main radius 0.191". Burrs and sharp edges are to be removed. Please review print for additional technical information.

Buyer Information

Industry Government Military
City/Region Randolph, New Jersey
Country USA

RFQ

RFQ Number 421490
Material Ceramique
Material Grade Alumina

Technical Specifications

Category Ceramic Mold Casting
Dimensions

The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience

Ceramic Mold Casting: Ceramic molds are made at ceramic mold companies. Making a ceramic mold is similar to making a plaster mold except that pouring a ceramic-based slurry mixture over the pattern makes the ceramic mold. The mold is allowed to set to a rubbery consistency then the pattern is removed. As with plaster mold castings, a ceramic mold casting can produce parts with smooth finishes, slender sections and fine details. Parts made as a ceramic mold casting can be very small or up to several tons and can maintain small tolerances.