Housing This RFQ was sourced on www.MFG.com in USA for Chemical Engraving Buyer needs to do chemical etch on acetal material for better adhesion. Part is approximately 35.84mm OD x 21.2mm long. They will evaluate method for prototypes, but they need a source that would be able to treat parts for high volume production. Tooling may or may not be needed, as parts need to be dunked into acid solution for small amount of time. Acid cannot remain trapped in part, as it will start to eat away at the material if given enough time. The buyer has attached the treatment method that they had in mind - reference the section on Celcon. They have also attached a print of the part to be etched. Buyer Information Industry Automotive City/Region Janesville, Wisconsin Country USA RFQ RFQ Number 370867 Material Thermoplastic Material Grade Acetal - Celcon TX90PLUS Technical Specifications Category Chemical Engraving Dimensions The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services for the machine tool industry, automotive industry… For more information visit www.MFG.com. MFG.com analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience. Chemical Engraving: Chemical engraving is a process similar to photo finishing. A negative of the engraving is scribed on the material. Removing the resulting photographic emulsion from the material leaves the engraving on the material.