Login to your MFG.com Marketplace account
Find the perfect manufacturer to make your RFQs or assembly.
Flexible die forming of a metal chamber. Approximately 73.0 mm OD x 30.7 mm long. Please see drawing for dimension specifications. SS316 metarial as attached drawing....
Production of a die formed Contact AA, Positive. Approximately 0.312" x 0.1" x 0.456". Please see drawing for all specifications. Stamped and formed, 0.013” steel with nickel plating. ...
Looking for price, lead time and min quantity on this part. Approx 169.1 mm O.D. x 16.16mm thick ...
Stamping of Trigger Link. Approx. 1.53" long x 0.5" wide x 0.51" deep. Please see drawing for complete dimension information. Buyer needs part stamped and formed per print specifications. Please quote with and with out heat treating....
Stamping of a slide protector. Finished part approximately 14.50" long x 2.00" wide x 0.100" thick. Flat plate approximately 15.50" long x 7.00" wide x 0.100" thick. Please see drawing for dimension specifications. Drawing close to scale. Can scale drawing for additional dimensions. ...
Stamping of a holder. Approximately 0.784" long x 0.584" wide x 0.156" tall. Please see drawing for specific dimensions. To hold wires in small overmolded cable, increase assembly stiffness. See attachments for exact geometry, dimensions and notes....
Production of a collar. Approximately 4.906" OD x 1.5" long. Please see drawing for specific dimensions. Plain finished but lightly coated with oil to prevent rusting....
88lb stainless steel, vertical grain, 5 1/4" tall, 211 diameter can, not varnished. We will provide samples to competetive bidders....
This product is designed to hold a tranformer pad to a plastic underground box....
This product is designed to hold a tranformer pad to a plastic underground box. 1/4" thick x 7.43" long x 2" wide....
Approx size of finished part 116.95mm long x 19.0mm wide x 16.27mm high. Material thickness .016" 20 pcs to be delivered by 10-8-04, remainder to be delivered on 11-15-04...
this bracket is used in a above grade plastic pedestal used in the CATV ultility market...
Aluminum bracket type 6063. Approx 13.25" high x 21" long x 1.62" wide x 1/4"...
Material is specified on the print and the exact stamping method will be determined by the manufacturer. Quote tooling as a seperate fee. Do not roll up tooling costs....
Need quote ASAP! ((RUSH))- Line Down! 3.058" long x 2.06" wide x .75" deep. Made from C1050 .050" thick. Harden to Rc 40-45 Protective Finish Phosphate Finish (Black) must be uniform in color. ...
Sheet, 16 Gage 316L SS, Corrugated First, Then Cut to Size....
Thickness: 32 Gauge Stock Height From Inside: 11.5 mm Inside Diameter Maximum: 21mm Material: Cold Rolled Steel Samples: Need 1000 Pieces as samples. RFQ Intent: Cost comparison only. ...
Stamping of a label hanger. Approx. 3.8" long x 1.5" wide Material: 0.0625" CRS ...
Stamp and form pieces from sheet stock to print specifications. Approximately 1.75" long by 5/8" wide stamped pieces bent to print specifications of approximately 1/2" X 1/2" X 5/8"....
Production of a horn L bracket. Approximately 6" long x 0.75" wide x 2" tall. Steel L bracket coated in black. Please see drawing for specific dimensions....
Production of a wave washer. Circular part 3/4" ID x 1" OD. Made of spring steel. Tolerance +/- .002". Please include Cad Plating in quote. See attachment for drawing....
Production of a clevis bracket. Approximately 3/16" thick x 1" x 7-1/8". Two holes punched and formed. Please see drawing for specific dimensions....
Production of a clevis bracket. Approximately 3/16" thick x 1" x 5.75". Two holes punched and formed. Please see drawing for specific dimensions....
Production of a escutcheon. Brass sheet 0.028" thick to be formed to a shallow casing, measuring roughly 12.1" X 0.34" X 0.5" inches. Please see drawing for all specifications....
Production of an aluminum 1"x1" square tube.Approximately 1.25" x 1.0" x 1.0". Please check the attached drawing for details. ...
Production of an aluminum j bracket hanger. Approximately 4.0" x 0.625" x 0.125". Please check the attached drawing for details....
Production of a LOWER SUPPORT . Approximately 35.3175" X 2.625" X 2.25". Please check the attached drawing for details....
Production of bracket. Approximately 42mm x 14mm x 4.91mm. Please check the attached drawings for detail information. Material Mild Steel ASTM - A366 Gauge 22 Filea attach PDF and a Parasolid Dimensions are in mm....
Production of a rail1, approximately 318.9mm x3.5mm x3.2mm. Please see attached drawing for details. Material CSN11331.21 is Czechic standard. Supplier could select equivalent material in China Local market....
Production of a Rail2, approximately 231.7mm x3.5mm x3.2mm. Please see attached drawing for details. Material CSN 11331.21 is Czechic standard. Supplier could select equivalent material in China Local market....
Flexible die forming stamping of a bracket. Approximately 3.610" long x 1.610" wide x 1.500" thick. Please see drawing for a dimension specifications. This part is used to lock a Electrical above grade plastic pedestal this product is used outdoors thru-out the USA....
Production of a die formed Cover. Approximately 51.56" x 2.85" x 1.41". Material is 6061or 5052 aluminum. Please see drawing for all specifications. Supplier to quote material and forming of a 6061 aluminum cover, buyer will mark and anodize.The cover has two bends and a formed recess in the middle ...
Production of a die formed Stamp Small Contact set (one each of two parts). Approximately 1.526" OD x 0.317" long. Material is Beryllium copper . Please see drawing for all specifications. Note: The buyer is quoting on this job for a customer. Although the order is not firm at this ti...
Do not scale drawings. Liberal tolerances: +/- .015", +/- 2 degrees. Tabs shown in dwg will need to be tapered and mildly sharpened to a dull edge. May be formed rather than ground. Tumble finish to remove all sharp edges and corners. Will discus...
Stamping of a perforated disc. Please see drawing for specific dimensions. Material Specification: Perforated Sheet - SS304 - (.015") Thick - (.020") Thru-Holes - (.045") Staggered Centers - (625) Holes per Sq./Inch - 20% Open Area Prototype Parts: Qty (100)...
Stamping of a buckle assy. Parts are roughly 1.75" long x 0.8" wide. Part "A and B" buckle Assy. for wrist watch. Supplier to make tooling as required. Supplier to form parts, heat treat, polish and chrome plate. Supplier to test for proper "Snap together" after parts are assembled. Please q...
Production of a card clip. A simple [non rusting material] to slide over a 1/4 inch rod that will hold a card pushed into its base. Size before foming 5.5"long x 2" wide. Material can be stainless steel, steel chrome plated, or any other material that can be used as a clip. ...
Production of a plate. Approximately 8.94" x 6.91" x 1.94". Please see drawing for dimension specifications. Engine Cover Plate Shroud...
Need fence plate stamped with 5 holes per attached drawing. 16 guage or less. Need small 2 x 2 x 2 small fence bracket with 2 holes minimum per attached CAD. 20 guage. Non-disclosure is attachement 3...
This item is use to clamp a 1/4" rod to a CATV aluminum bracket. Approx 1" wide x 1" long x .375" deep. Note: the drawing calls for the material to be stainless steel disregard this. the material will be steel and finished Zinc plated...
Aluminum bracket type 6063 or 5052 series qtys. approx 500-1500. If needed, a sample can be provided. Approx 34" wide x 17" deep x 1.62"t hick....
Aluminum bracket is used in a cable tv above grade plastic pedestal. Bracket mounted to a plastic pedestal which supports catv equipment. Approx 19.25" long x 11.125" wide x 1.62" wide....
Aluminum bracket type 6063 or 5052 series qtys. Approx 500-1500. If needed, a sample can be provided. Approx 34" wide x 17" deep x 1/4" thick....
These brackets are use in our above grade plastic pedestals used in the cable TV business to support equipment. Measurements approx 34.13" long x 19.86 high" x 1 5/8 wide x 1/4" thick....
These brackets are used in our cable TV pedestals to support equipment. Approx 23.375" long x 22.5" wide x 1.62" deep. Material Thickness for this part is a 1/4" just like the 1010, 88, 1230...
Bracket approx 2.5" long x 1.5" wide x 1.61" deep. This part is used for locking a above grade CATV pedestal...
Finger stamped approx 21mm long x 2mm wide x .20mm mat'l thickness. Please supply per part cost and a cost for any tooling....
Part of a locking devise for a plastic CATV pedestal. Approx 2.625" long x .75" wide x 1.37" deep made from 1/8" min stock (5/32" max)....
Spring clamp for razor balde holder. 1.25 x 2.50 x 20 ga (0.359). Tooling is required. Closest tolerance +/-.005"....
Production of a retaining clip. Approximately 0.275" long x 0.205" OD. This is simply a retaining clip for a fiber optic furcation block. Please see drawing for specific dimensions. Heat Treating to 44-48 HRC(spring Temp)...
Production of a support disc. Approximately 3.000" OD x 0.022" thick. Please see drawing for dimension specifications. Simple stainless steel disc. This is the center section of a pneumatic diaphragm. Must be stainless steel and have no rough edges. Saline/salt water environment possible. Please...