Login to your MFG.com Marketplace account
Find the perfect manufacturer to make your RFQs or assembly.
We are supplying the pin as depicted in the attached files....
Production of a electroless plated 200174-
00.Approximately 172.81mm x 89mm x 9.6mm. Material is GE
PC/ABS plastic. Please see drawing for all specifications.
Selective Electroless plating 10 micro-inches Nickel
over 40 micro-inches Copper with Adhesion per ASTM 3359
plating adhesion sta...
Apply 0.0005" nickel electroless plating finish to part.
Part is approximately 7" Long X 1.6 Wide " X 0.013 thick....
Production of a oven blade. Part is approximately 15.655"
long x 1.25" wide x 0.76" thick. Please quote price and
lead time for the attached drawing for electroless nickel.
Buyer will provide the part. qty. 18...
Electroless nickel plate on steel "L", 14.5x10x6(w)x.5(thk)...
Plating of a skirt. Approximately 5.00" long x 5.00" wide
x 3.805" tall. Please see drawing for dimension
specifications. Buyer is interested in receiving a quote
Copper Plating on plastic.
Please contact buyer with any questions. ...
Plating of a rail. Aluminum 6061-T6 50" x 4" x 3/4". No
threads. Electroless nickel plating....
Electroless plating of a flat heat cover. Part is
approximately 154.94mm x 152.4mm x 9.53mm. Material is
aluminum. Please see drawing for all specifications. Unless
otherwise stated, the drawing takes precedence. Nickel
plating on Aluminum...
Buyer needs the following items chrome plated. Each piece is approx 1" x 0.24" x 0.25" in size. Threads need to remain unplated. Buyer will blank these with nylon plugs prior to shipping unplated items....
Clean part before plating per TT-C-490 Method II or III (Solvent or Hot Alkaline)
Electroless Nickel per specification MIL-C-26074, Class 2, Grade B
Inital Lot to be 186pcs- Delivery will be 2 weeks from Time of order
Part is appr...
We have some small stainless steel 316 parts, 1 inch by 3/4 inch, that need to be plated with electroless nickel.
We are plating the SS to enhance it’s solderability with common solder and fluxes. Ni is a good material for our soldering process....
Production of a electroless plated Bracket. Approximately
105mm x 67.1mm x 53.5mm. Material is JIS G 3141 SPCC
steel. Please see drawing for all specifications.
Argentate zinc electroplating 8um....
Production of a electroless plated Idler Bearing Seal.
Approximately 1.75" OD x 0.72" long. Material is 1215 steel.
Please see drawing for all specifications. ...
The item to be Nickel Plated by Electroless process is a
tube in "L" shape.
are 3.93 inches by 1.57 inches and has a diameter of 3/8
The tube is used as a
component for Stoves. The plating or coating must be also
in the inside of the tube. That is
Buyer needs 12 micron electroless nickel plating.
Mecp-41346-00-100 shows quantities and part numbers. Buyer
will provide parts and is requesting one quote for entire
Production of a electroless plated Retainer. Approximately
2.235" OD x 0.875" long.Please see drawing for all
Need .001 Electro less Nickle Plating. ...
Electroless plating of nylon fabric. Nylon approximately
63" wide x 500 yards long. To be fully coated on both
sides. ALL FIBERS TO BE COATED. Buyer will supply nylon.
First article required for testing. ...
Buyer is looking for a plating house that can plate this using ASTM B733 Type 2 Class 4 (Low Phosphorous Electroless Nickel) .001" thick. This part cannot exceed 250°F because of the T6 temper. Prototype quantities initially, then quantities of 500, 1000, 5000....
Electroless Nickel Plate .0002 to .0003 thick.
Shaft approx 9.7" long x .8749" Dia....
2 seperate parts. Quote 3800 sets. 1 of each per set. Electroless Nickel Only per ASTM B733 SC3, Type II, Class 3 (see drawings)
This part is being bid as part of a package to the government. IAM Systems, Inc. does not have the order at thi...
PLATING ONLY - This RFQ covers plating of a small steel shaft. The shafts are already fabricated and require Electroless Nickel plating. Plating shall be performed in accordance with ASTM-B733, TYPE 4, CLASS 2, SC3 at 0.001 thickness. This process requires heat treatment. ...
I am trying to find an appropriate finishing process to
deposit a .010 in. thick coating on
an "electrolytic mandrel" using a non-conductive plastic
substrate (probably ABS.) The
coating, in order of preference, should be silver, copper,
aluminum or nickel. To be clear I am
not looking to use ...
We’re interested in plating 30 automation/process trays
with an electroless nickel or
equiv. coating (wear & rust prevention, and low
solderability). The trays have been
machined out of precision ground O1 tool steel (standard
hardness). The pocket size(s)
were machined 0.001" oversized to a...
Approximately 4.13" x 1.495" x 0.19". Material is aluminum.
Please see drawing for all specifications. Unless otherwise
stated, the drawing takes precedence.
Electroless Nickel with Heavy Acid Etch. Certification not
necessary but equivalent to MIL-A-26074 Cl 3 Grade C. Due
to shipping, prefer co...
Turning of a cylindrical steel housing shell with
electroless nickel plating per print (metric).
Approx. 10mm OD by 13.5mm long....
Multiple Operation Multi-Axis machining request. Operations include profiling, contouring, drilling, tapping, assembly w/ loctite, finish mill op's, EDM and Nickel Plating.
Approx Part Dim's - 9.6850" (+ 0 - .0197") dia x 7.4409" (+/- .0079")
Finish is Nickel plating, take note on the drawing f...
Machining and electroless nickel plating of a long
housing. Part size is 0.375" tall x 0.700" wide x 2"
long. The buyer is hoping to find a vendor who is in a
situation to provide a fast turnaround on this part.
In appreciation, they will send out payment for the job
Zinc castings - with electroless nickel plating, see drawings quote 500- 2500 units...
Zinc castings - with or without electroless nickel plating, see drawings quote up to 100,000 units of each type....
Part is .1875 thick 01 steel bar stk. electroless nickel plating .0002- .0007thick....
11mm wide x 5.5mm high x 5.6 mm thick
Finish is Electroless Nickel Plating...
Turned 12L14 steel part approx 2 3/4" length, with
nickel plate finish has through hole
and male thread on one end
Please quote including plating in quantities of 10, 100
Fabrication of a bracket to be punched, and then formed on
a brake press. Approximately 1.84" tall x 1.20 wide x 0.5"
thick. Tolerances are +/-.01. See print for specific
dimensions. Please quote Bright Electroless Nickel Plating
Production of a feed thru mount plate. Approximately
1.500" x 1.500' x 0.250". Please see drawing for
dimension specifications. (8) thru holes and one
counterbore. Low Carbon Cold Rolled Steel. Electroless
Production of a motor housing. Approximately 1.375" OD x
0.87" long. Please include electroless nickel plating in
quote. See attachments for exact geometry, dimensions and
Production of a shaft support. Machined rectangular part
approximately 60 mm long x 40 mm wide x 50 mm high.
Requiring electroless nickel plating. Please see drawing
for all specifications....
Production of an Aluminum base. Approximately 3.505" x
3.505" x 0.347". With electroless nickel plating. The part
can be quoted with or with out this, (Please specify).
Please see drawing for specific dimensions. ...
Fabrication of a milled mount plate. Material is 6061 T6 Aluminum. 10-32 UNF and 6-32 UNF Helicoils are installed. Electroless nickel plating required....
Production of a user interface housing. Approximately 3.933"
x 2.258" x 0.5". This part is an electronic enclosure for an
automotive user interface. The buyer plans to finish the
part in electroless nickel, or chrome plating. ...
Bushing with shoulder, cylindrical. Approximately 2.0" long x 1.13" OD with a 0.56" clearance hole. Material is ANSI 1018 cold rolled bar. Part required electroless nickel plating....
Quantity three pieces of small machined 1018 steel component with black electroless nickel plating, and quantity three pieces of 17-4PH stainless steel pin. Please see drawings for all specifications and contact Buyer through MFG.com with any questions regarding this RFQ....
Manufacture velocity stack by CNC lathe from aluminum
The part is about 50mm ID x 80mm OD x 42mm long.
Use 1.875" id x 3.375"od holobar available in North
America, or 47mm ID x 80mm OD holobar available in
Tighest tolerance is +/- .002"....
Production of a Steel Flange - CRS Steel with Nickel Plating
- Overall Dimensions 1.500" x 1.500" x .250" thick - .939"
thru hole in center of part - undercut inside of thru hole -
Exact dimension of the depth of the undercut to be
determined, but will be similar to what is shown on scale of
Production of a turned Nut, #10 x 1/16. Approximately 0.25"
OD x 0.55" long. Material is Half Hard brass. Turned Brass
part, electroless nickel plating. Thread must be slightly
undersize to allow for plating....
Production of a housing. C12L14 housing with diameter
0.38" x 0.206" tall. Finish to be electroless nickel plate
0.00025 to 0.00035 thick with certs. Please see drawings
for specific dimensions.
Production of a milled / turned Adapter. Approximately
0.303" OD x 0.75" long. Material is Half Hard brass. Turned
and milled Brass, electroless nickel plating. Buyer
to take care of electroless nickel for requested delivery. ...
1/2-13 Thread x 10" long stud.
Finish must be very clean & requires Electroless Nickel
plating .0003-.0005" thick.
Make from ASTM A193 Grade B7 Steel....
Production of a hook. Approximately 2.077" long x 1.68"
wide x 0.375" thick. Please include electroless nickel
plating in quote. See attached drawing for dimensions and
notes. The buyer is having this part quoted in multiple
categories in order to determine the most cost effective
method of man...
Production of a milled Suspension Plate A. Approximately
400mm x 350mm x 45mm. Material is steel. Please see drawing
for all specifications. Unless otherwise stated, the drawing
Finish is to be Electroless Nickel Plating....