COV-HOR-CORNER ANCHOR BRACKET-RIGHT

This RFQ was sourced on www.MFG.com in CANADA for Bending


Production of a COV-HOR-CORNER ANCHOR BRACKET-RIGHT (Bending).

Approximately 4.431 inch x 3.391 inch x 3.124 inch.

Please see drawing for all specifications.

 

Buyer Information

Industry Consumer Products
City/Region Drummondville, Quebec
Country CANADA

RFQ

RFQ Number 977106
Material Carbon Steel
Material Grade HRPO A1011

Technical Specifications

Category Bending
Dimensions 4x3x3 inch

The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience

Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.