Top Casting - Torsion Side, Drive Side This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Die Casting Production of a top casting. Approximately 3.341" long x 3.13" wide x 2.01" high. Please see drawings for complete dimensions. Buyer needs confirmation of manufacturability. Current supplier states it cannot cast as designed. Buyer has proposed moving the main parting lines 90º. Current supplier says that would require too many secondary operations. There are 2 castings in question. They are basically left-hand/right-hand version, with a few differences between them. Need second opinion on if the part can be cast as shown, or at least if the main cosmetic features can be kept intact. Part Part Number: 3310323.000 & 3310324.100 Material: Zinc Material Grade: Zamak-2 Technical Specifications Category:Die Casting Dimensions0.0 x 0.0 inch Annual Usage:100000.0 The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience Die Casting: Die Casting is a process in which molten metal is forced under high pressure into cooled dies. This process is normally used to produce large numbers of small items of a particular shape. Die casting is rather expensive to set up, but can produce mass quantities of castings at relatively low, per piece cost.