Outer Shell 5

This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Bending

Production of 5 sheet metal parts of 0.050" 6061 aluminum, burr free and red anodized. Shown with square corners for conventional SM fabrication. If quoted for CNC, all corners could be round. These parts are "cosmetic" and must be scratch free, burr free with no tooling marks. Approximately 3.85 inch x 3.78 inch x 3.25 inch. Please see drawing for all specifications.


Part Number:       Item 2
Material:       Aluminium
Material Grade:       6061

Technical Specifications


Dimensions3.85 x 3.78 x 3.25 inch


Annual Usage:300.0

Are you looking for suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) to provide manufacturing services for machine tool industry, automotive industry? For more information visit MFG.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your online quoting experience

Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.