Mandrel, Tipping, Curved 8 & 10 Fr This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Wire Forming Production of a formed Mandrel, Tipping, Curved 8 & 10 Fr. Approximately 17.5" x 1" x 0.145". Material is 300 series stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The straight mandrel configuration prints are provided in addition to the formed configuration. Reference the "material" block on the drawing to know which mandrel to use. The mandrels are traditionally ground to meet the multiple diameter requirements then formed. Part Part Number: SK2209 & SK2210 Material: Acier inox Material Grade: 300 series Technical Specifications Category:Wire Forming Dimensions444.5 x 25.4 x 3.683 inch Tolerance:0.127Annual Usage:200.0 Get quotes online for manufacturing services at MFG.com from machine shops, fabricators, job shops and contract manufacturers. MFG.com connects buyers and suppliers when the buyer has a need and the supplier has the right expertise and capacity. MFG.com analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience. Wire Forming: Forming is a common wire forming process performed with a variety of techniques depending on the wire diameter. Wire diameter determines the bend radius and tolerance for deformation at the bend. The type of wire or rod used and its diameter also determine whether the wire can be bent manually with a hand tool or whether the use of a press and die are required.