Impeller & Shroud

This item was sourced on as one of the items in an RFQ in USA for 5 Axis Milling

Production of a 5 axis milled Impeller & Shroud. Approximately 9" OD x 0.5" long. Material is PMMA (Acrylic Plastic) plastic. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. This is for an R&D project that will require up to 48 sets. The first 9 sets are 3 exactly per print and 3 sets of two additional version with a slight change in location, shape and/or size of the vanes. Material Note: Do not use polycarbonate.


Part Number:       080509TMFE/B
Material:       Thermoplastic
Material Grade:       PMMA (Acrylic Plastic)

Technical Specifications

Category:5 Axis Milling

Dimensions12.7 x 228.6 inch


Annual Usage:48.0

The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services for the machine tool industry, automotive industry… For more information visit analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience.

5 Axis Milling: Five axis (5-axis) milling refers to the machining of a part whereas the part geometry is typically complex and requires the machine tool to position and articulate the cutting tool along 5 axes of motion vs. the more common 3 axes (X, Y, Z) of motion. The CNC machine tools used in this process are called 5-axis machines or 5-axis machining centers. Five axis machining is most commonly used in the aerospace industry to machine airframe components that have draft surfaces, turbine engine components and impellers. Five axis machines can also increase efficiency on prismatic parts by allowing multiple sides of a part to be machined in a single setup.