Extrusion, Corner, Rounded, Recon

This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Bending


Production of a formed Extrusion, Corner, Rounded, Recon. Approximately 42.95" x 1.57" x 0.36". Material is rubber. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Buyer requires NDA Signature. *Supplier will need to be ISO Approved* Award Contingent upon Quality approval & PO’s to follow * Outside process should be via NADCAP approved suppliers. * Buyer orders by Ship Sets (This will be Qty 1 on RFQ). *Deliveries will be for 2-3 Ship Sets per month (This will be Qty 2 on RFQ). *Anticipated total Ship Sets are 80+ (This will be Qty 3 on RFQ)

Part

Part Number:       A336152-340
Material:       Elastomer
Material Grade:       


Technical Specifications

Category:Bending

Dimensions1090.93 x 39.878 x 9.144 inch

Annual Usage:240.0

The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience

Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.