Contact Terminal 2 This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Progressive Die Stamping Production of a progressive die stamped Contact Terminal 2. Approximately 0.513" x 0.344" x 0.25". Material is brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Stamped/Formed Brass Contact Terminal for use as an electrical contact terminal in an automotive application. Part is to have no sharp edges (deburred). If there are any off-the-shelf parts similar to this part in size Buyer would be very interested in reviewing them! Part Part Number: 001 Material: Laiton Material Grade: Technical Specifications Category:Progressive Die Stamping Dimensions13.0302 x 8.7376 x 6.35 inch Tolerance:0.127Annual Usage:10000.0 The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services for the machine tool industry, automotive industry… For more information visit www.MFG.com. MFG.com analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience. Progressive Die Stamping: Progressive die stamping is a process of feeding the sheet metal through a series of successive dies, each performing specific operations, to form the finished part. Progressive die stamping is commonly used for large production runs and where the material is cut in strips and fed from rolls.