Clamp Exhaust This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Bending Production of a clamp exhaust. Shearing and /or cutting, deburring (vibro), punching and /or drilling, roll forming. Approximately 9.36" long x 0.56" wide x 0.090" thick flat. Part Part Number: 154-0003A Material: Acier inox Material Grade: Technical Specifications Category:Bending Dimensions237.744 x 14.224 x 2.286 inch Tolerance:0.254Annual Usage:100.0 Get quotes online for manufacturing services at MFG.com from machine shops, fabricators, job shops and contract manufacturers. MFG.com connects buyers and suppliers when the buyer has a need and the supplier has the right expertise and capacity. MFG.com analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience. Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.