Bracket This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Bending Production of a formed Bracket. Approximately 15.2" x 0.6" x 0.2". Material is 5052 aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Part Part Number: BK421000 Material: Aluminium Material Grade: Technical Specifications Category:Bending Dimensions386.08 x 15.24 x 5.08 inch Tolerance:0.127Annual Usage:100.0 The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services and are members of the MFG.com community. For more information visit http://www.mfg.com. MFG.com performs a 5-point inspection on all engineered parts and RFQs to ensure quality and enhance your quoting experience Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.