35-00019 DUMP PUMP MOUNTING BRACKET This item was sourced on www.MFG.com as one of the items in an RFQ in USA for Bending BRACKET, 11.35" LONG X 1.00" WIDE WITH 2 90 DEGREE BENDS, MADE OUT OF 18 GA 304 SS. NO COSMETIC CRITERIA OTHER THAN DEBURRED AND CLEAN, SMOOTH. Approximately 6.75 inch x 4.7 inch x 1.0 inch. Please see drawing for all specifications. Part Part Number: 35-00019 DUMP PUMP MOUNTING BRACKET Material: Acier inox Material Grade: 18 GA 304 Technical Specifications Category:Bending Dimensions6.75 x 4.7 x 1.0 inch Tolerance:0.005Annual Usage:500.0 The following suppliers (machine shops, fabricators, casters, molders, 3D printing, CNC machining, etc.) provide manufacturing services for the machine tool industry, automotive industry… For more information visit www.MFG.com. MFG.com analyzes all engineered parts and RFQs for improved manufacturability and to ensure quality and a quick quoting experience. Bending: Bending is a flexible process that allows many different shapes to be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend. Forming is similar to bending. Complex parts such as U-sections, channel sections of different profiles can be produced by doing multiple bends. Roll forming is a continuous metal forming process that takes sheet, strip, or coiled stock and bends or forms it into shapes of essentially identical cross section by feeding the metal between successive pairs of rolls that increasingly shape it until the desired cross section is completed adding both strength and rigidity to lightweight materials.