Login zu Ihrem Konto MFG.com Marktplatz
Find the perfect manufacturer to make your RFQs or assembly.
Rotational Molded Chair for OEM application. Supplier
needs to quote single cavity rotational mold tooling.
Supplier can quote finished parts as well per the
quantities listed in this RFQ. Can supply 3d part file or
edrawing if needed.Production of a rotation mold to
produce a Lift Chair. Ma...
Production of a rotation mold to produce a Sensible Spa.
Approximately 83.99" x 78.63" x 34". Material is plastic.
Please see drawing for all specifications. Unless otherwise
stated, the drawing takes precedence....
Production of a rotation mold to produce a Roto Slide
800mm. Approximately 1424.29mm x 981.13mm x 620.61mm.
Material is steel. Please see drawing for all
specifications. Unless otherwise stated, the drawing takes
Buyer is looking for a billet mold created with a CNC
Machine, not a cast aluminum mold. Need a 2 part mold - chair and base are seperate. This mold will then be used to create a hollow rotomolded plastic chair....
Production of an upper trunk mold. The buyer is looking
for a rotational mold to suit the attached part. The part
is approximately 49" x 43" x 7"....
Production of a tube mold. Approximately 4.00" OD x 8.00"
long. Please see drawing for complete dimensions. Quote 2
each single cavity aluminum rotational mold OR 1 each dual
cavity aluminum rotational mold....
Production of a tube mold. Approximately 4.00" OD x 14.2"
long. Please see drawing for complete dimensions. Quote 1
each Single cavity rotational mold AND 2 each single
Production of mold for football toychest. Versatile
football shaped storage chest that can be used for toy
storage, clothes hamper or an ice chest. Estimated annual
usage on the mold would be 10,000 pcs. Part will be
Buyer currently has a single double-cavity mold for this
part. Buyer wants to increase capacity
quickly in order meet demand. Buyer currently has a
pattern, built to produce first mold,
that can be used by the winning bidder. More than one
bidder may be awarded.
Two cavity molds that can be de...
Production of a bumper blank. Approximately 50" long x
x 3" tall. Please see drawing for dimension
specifications. Buyer needs 2 identical Rotational molds
that will produce the attached part. The Top and Bottom of
the part are cut off 2" from each end. Please contact
buyer with an...
Buyer requires a rotational mold that will produce the
attached part. Part is roughly 43" long x 7.875" OD.
Please see drawing for specific dimensions....
Production of a roto-mold. Please see attachment for
specifications. Two cavaties (a right and left). Right is
just a mirror of the left. Please quote using the IGS
file. Please contact buyer with any questions....
Production of a container mold. Approximately 12.00" OD x
22.00" tall. Please see drawing for complete dimensions.
Basically a tall round bucket with an inside cone shape
bottom that has a threaded sleeve. Buyer needs a mold of
the following diagram. Contact buyer with any questions....
Production of a pressure tank with sink and drain.
Approximately 12.25" Diameter x 20" high x .125 Brush
NOTE: the Drawings attach are for the complete unit Please
DisregardPG#13 Table top
PG# 3 Hinge* and PG#1 Pump assembly*
Please see drawing for
specific dimensions. Part is being
Two cast aluminum molds for rotational molding. One for
the planter body and one for the reservoir tray. Please
see drawing for complete dimension information....
Mold making of a rotomold. Please see drawing for specific
dimensions. Buyer is a composites manufacturing facility
specializing in composite structures for aerospace and
naval applications. The buyer is currently seeking bids
for the attached item to be molded using Flame
Retardant Nylon 12 pe...
Mold making of a rotomold. Buyer is a composites
manufacturing facility specializing in composite
structures for aerospace and naval applications.
The buyer is currently seeking bids for the attached item
to be molded using Flame
Retardant Nylon 12 per EATON
Corporation ARM3100. The nylon must...
Mold making of a 50 gallon tank. Approximately 33" long x
22" wide x 19" high. This part is a rectangular water tank
used in a variety of applications. small fish tank, rv
water tank, 33" L x 22"W x 19"H. Buyer would like quotes
for a steel mold and an aluminum mold....
Manufacture of a mold for a sphere (ball) that is 31
inches in diameter, creates a wall thickness of .7.
Materials will be Polyethylene, mold will be texturized to
give naturalistic appearance, will be used for large
exotic animals such as polar bears and elephants.
Buyer is in...
We need a mold made for rotational molding of a fishing
Approx 4 ft wide x 8 ft long.
Steel or other metal would be
We will be roto-molding this part in house with one of our computer controlled 13’ or 19’ rock
and roll machines. We can accept e...
Molding of a Canoe or Kayak type craft.
Approx. 14’ long and 2’-6" wide
Buyer will accept any material suggestions as long as the
end part is able to maintain structural integrity....
One steel mold as the part description enclosed...
I am looking for a Rotational Mold Manufacturer to make me
a mold at a reasonabl price....
Need pricing for tooling as well as part piece price as
per quantities rerquested....
To provide drawings, and/or Mold based on Sample Kayak Ergo machine.To replace existing saftey cage, Aluminum cast w/shot-peened finish Roto Mold. To alow production of 2 Part cowling (split-piece design)Allow to produce Model and thereafter mold. The pulle...
Rotationally molded boxes with a series of holes to fit in cables, control and speaker along with four mounting attachments. Have existing tools available for immediate transfer to competitively priced molder....
A transparent 33" dome, one inch thick, made from Noryl TN240....
rotomolded air duct. material temperature requirements -100 to +300 F. ARM 8000 material used in the past. Duplicate files posted in both iges and dxf....