Login zu Ihrem Konto MFG.com Marktplatz
Find the perfect manufacturer to make your RFQs or assembly.
A buyer in Bridgeton, Missouri,USA is looking to source 1 Assembly parts....
Merci de me transmette en urgence votre chiffrage (coût+délai) pour la fourniture de 9 sièges fantassins.Livraison:Satory.Délai de livraison : URGENT 27/11/09.Une recette sera à prévoir.Merci de chiffrer les articles avec et san...
Production of a wire rope set. Kindly check attached RFQ &
quote ASAP. ...
Production of a assembled Coaxial soldersleeve device with
preinstalled lead. Please see drawing
for all specifications. Unless otherwise stated, the
drawing takes precedence....
Production of an aluminum ladder. Approximately 5880mm x
450mm x 60mm. The buyer is urgently looking for a large
quantity of custom aluminum ladders. Please offer according
to the attached drawing and specs. ...
Production of a cable. Delivery speed should take priority
over cost for 10 pcs. Cost takes priority for larger qtys....
Production of a assembled Magnetic Tube Assembly.
Approximately 0.31" OD x 6" long. Material is plastic.
Please see drawing for all specifications. Unless otherwise
stated, the drawing takes precedence.
Cosmetic part. Clear tube with three magnets, two
wooden dowels, and two black end plugs. Piec...
Production of a assembled M3 Sensor Cable. Please see
drawing for all specifications. Quantity of 250 cables of
three different lengths but identical construction....
Buyer is in need of a 25ft nylon rope which includes one
eye splice on one end and one pig tale splice on other end.
Install one stainless steel swivel hook and one stainless
steel snap on hook on spliced eye of 25ft line. Other end of
line needs a pig tale splice. Please contact Buyer through
Stainless steel parts specs:
Eye bolts: Dia 3/8" Length 3" nut and washer. Quantity: 4 of
Swivel snap on hooks: Length 4". Quantity: 3.
One standard snap on hook: Length 3 1/2" x 1/4"Dia
Please contact Buyer through MFG.com messaging system with
any questions. The buyer is bi...
Buyer is in search of a cable track. Install two threaded
eye bolts at the each end of the 20ft cable. Run eye bolt
through cable, then loop the cable to about an 3" loop and
install the 3 securing cable clamps to secure the loop.
Quantity: 2 sets of 20ft cables, 4 stainless steel eye
bolts, 12 cabl...
Production of a assembled TOP STACK. The buyer needs 76
152 spacers made of shim material
stacked up and bolted together. The webs and spacers are
0.002" thick and made of stainless. The assembled stack is
1.522 x 1.640 x (.289 to .324)". The stack height will
with shim thickness...
Production of a assembled Bottom Stack 165 Webs.
Approximately 1.64" x 1.522" x 0.7". Material is 302
stainless steel. Please see drawing for all specifications.
Need metal shims stacked and bolted. Shims are .002" thick.
Two parts form the stack, the Web and the Spacer. The
basic unit of the sta...
Production of a right Triangle shaped skid with attached
brace, max dimensions 5.75" x 5.5". 6061 aluminum welding
needed. Parts will be supplied by buyer. Material is 1/16"
wall, 3/4" x 3/4". Extruded Aluminum Square Tubing, and 1/8"
Aluminum Plate, both Alloy 6061.
Notes: Corner is perpendicula...
Production of a right triangle brace, needs aluminum
welding, max dimensions 7"x 6.25". Material is 1/16" wall,
3/4" x 3/4" Extruded Aluminum Square Tubing, Alloy 6061
and 1/8" thick aluminum bar.
Parts will be supplied by buyer. Corner is perpendicular.
Front and bottom faces must be welded and f...
Production of a box frame. 6061 Aluminum Welding of 26.5" x
9" x 5.5" box frame. All corners are perpendicular. All
outside faces (Top, bottom, left, right, front, back) must
be welded and finished flush with the surface. All inside
junctions should be welded with small concave fillets. Parts
Production of a SS kitchen island legs with adjustable feet.
Approximately 1.5" x 1.5" x 34". Please see drawings for all
Production of a trailer equalizer. Approximately 11.5" x
3.93" x 2.91". Please see drawing for specific dimensions.
We prefer to have the parts cleaned and lightly oiled to prevent rust. The Target price is $5.15 FOB Dallas, Texas. We will decline all quotes that are over $5.36 USD FOB Dallas, Tex...
Production of a merchandiser. Approximately 90.97" long x
52.813" wide x 21.813" high. Please see drawing for specific
The buyer is bidding on this job for a customer. Although
the order is not firm at this time, the buyer will notify
all quoting parties once a decision has been made....
Production of a flat pleat clamps. Approximately 9.25"
long x 3" wide x 3" tall. Please see drawing for
specific dimensions. Aluminum pieces cut to length and
milled as shown then welded....
Production of a brace and pivot. Approximately 7.125" long
x 7" wide x 0.5" thick. Please see drawing for
specific dimensions. Steel pieces cut to length and milled
as shown then welded....
Production of a mandrel cart. Please see drawing for
dimension specifications. Please contact buyer with any
questions. Components for this assembly are to be provided
by the supplier. ...
Production of a sign holder. Approximately 43.50" long x 30.75" wide. Metal frame welded together, composed of 3/4 x 1/8 CRS flat stock and 3/8 rod. The cross members are slotted for 1/4 -20 carrage bolts. Cut the bottom of the legs on an angle so that it will be easy to stick in the ground! The t...
Production of a print head bracket. Please see
drawing for dimension specifications. This is a new part
for buyer. Starting with 50 pcs. and than 100 pcs. every
month until the blanket of 1000 pcs are used up....
Production of a skywave connector. Provide parts/materials/assembly to produce 10 each wiring harnesses for initial field testing units. Harness to consist of 1 AMP 103956-9 connector, 8" wire(22AWG) for each conductor (ribbon cable or multiple conductor cable). End opposite of AMP connector t...
Production of a pleat clamp assembly. Please see drawings
for specifications. Shear perforated
aluminum to 6" x 9" rectangles.
Bend over 2 1/2 inch pipe with 2
inches to radius center on one side and 3 1/2 inches to
the radius center on the other side.
Weld Pleat Clamp Stems 1 inch over from ...
I would like to source the whole complete assembly.
The volumes are increasing to 400K p.a. in 2007 and I am
prepared to agree a long term
Other harness, etc are also available.
These dates are not firm.
Please be aware that I will need to obtain samples
need assembler to put together mini-helmets. Process
includes inspection of plastic
helmets from fabricator(provided), riveting on chin straps
(provided) , applying 2 small
stickers (provided); sub-assy of "accessory pack" put into
plastic baggie (extra foam,
helmet bag and instruction sheet( al...
Assembly shop needed to assemble medium to high volumes of a simple PVC based car wash system with solenoid valves, and other minimal flow controls. Tasks would be bonding PVC and screwing nozzles into fittings to create sub assemblies, and then packagi...
Unfortunately, we don't drawings or diagrams to provide at this time. We are developing a new feature within one of our products that will allow our customers to add or replace a component quickly in the field. The concept requires a 4-pin male and female connector, and then another female co...
Assemble harness per instructions, with protective sheathing all the way to the ends.
PRT file has been converted and exploded into 7 views in PDF format for clarification....
DC Cable Assembly consists of:
1 - Flat Cable, 4 conn, .100 CL, 22AWG (preferred to 24) 2 - MTA-100 Connector Assembly, 22AWG, Standard, 4 position
7.5" long overall finished dim
Quarterly Qyantities: 100, 250, 500, 1000, 2500, 5000 and 10000....
10,000 PCS PER YEAR....
10,000 PCS PER YEAR ...