FLANGE-CATHEDRAL VETTE 90MM TBW

此询盘采购上www.MFG.com在 USA 作 铣削


***NOTE: This is a revision of the original part. This part is for fabrication of a sheetmetal Aluminum Intake manifold. Material is 6061-T6511 aluminum. The outer periphery can be +/-.03", but the m6-1.0 threaded bolt pattern needs to be +/-.010 locations relative to the ID. The ID and Seal Groove need to be +/-.005 all dimensions. The seal groove needs to have a 64 rms or better finish. The large radius at the back of the port can be +.02/-.120". The step at the front face needs to be +/-.01" depth, but the periphery of the step can be +/-.03".

  Approximately 8.5 inch x 4.63 inch x 0.625 inch overall part dimensions. Please see drawing for all specifications.

买家信息

行业 金属制品行业
城市/地区 Katy, Texas
国家 USA

RFQ

询价号码 997581
材料 Aluminium
材料等级 6061-T6511

技術參數

類別 铣削
尺寸 8x4x0 inch

通过MFG.com,从机加工厂,钣金厂,铸造厂,模具厂和其他各类制造加工企业获得在线报价。 MFG.com为有直接采购需求的采购商和有生产能力、经验的供应商之间搭起在线沟通的桥梁。

铣削: 铣削、数控铣削或手工铣削是制造棱柱体部件的工艺。 带有多个出屑槽的旋转圆柱刀具通常称为端铣刀,它沿多条轴线走刀,从而加工出各种特征结构,比如开槽、凹坑和型面。 进行铣削加工的车床称为铣床,而数控铣床经常称为加工中心。 铣削可以手动进行,如果采用数字控制,则称为数控铣削。 铣削和数控铣削在机加工厂内进行。