铸模成型招标书 - 獲得供應商線上報價

Small Glass Dome- borosilicate...

铸模成型

Attached are the blue prints. Model can be created in real life for mannufacturing. The bottom must be ground flat, Buyer will mate these with a magnetic ring strip with an adhesive backing. The prototype on hand is ~2.5mm thick boro tubing (80mm OD) flanged out at the bottom to ~...

MOLDED GLASS LENS

铸模成型

Production of a molded borosilicate lens, approximately 2.74 x 1.19 x 2.9 inches Dimensions all around need to be held within +/-.010 inches. Please see 3D model attached....

D-8103

铸模成型

All parts must be manufactured in exact accordance with all dimensions, material specifications, finish, painting, plating, and/or coating specifications, marking specifications, and all other notes as per the drawing with no exceptions or variations. We will only accept complete, turnkey pri...

LENS COVER

铸模成型

Production of a LENS COVER. Approximately 82.6 mm OD x 18.5 mm long. *Please quote as soon as possible. The Buyer is interested in award...

Glass Lens

铸模成型

This component is a glass lens about 0.480 inches in diameter, has a 0.090" raise and is domed to a total height of 0.214 inches. The glass has to be clear and is use in front of a small light. Glass is my preferred material, though I am open to clear plastics as well--though cost...

Concrete Deadman

铸模成型

Annual volumes are noted on drawings - they will ship to four different locations: Anaheim, CA, - Tipton, Iowa - Hagerstown Maryland and Seguin Texas For reference, the part shown as the thumbnail image is: Approximately 168.0 ...

FP1

铸模成型

Small part to be cast in a polycarbonate like (material as close to polycarbonate as possible) urethane plastic. Approximately 2.7 inch x 1.11 inch x ...

SCR Molded Boroscillicate Wind...

铸模成型

Boroscillicate Molded Glass window. Approximatel 3 inches in Diameter and 0.35 inches in height. Finished Part must have good tolerances and minimal small bubbles. Please see drawing for all specifications and contact Buyer through the MFG.com messaging system with any ques...

Rhum Bottle

铸模成型

Rhum Bottle Made of Glass. Approximately 241.0 mm x 84.5 mm x 84.5 mm....

50A Durometer Polyurethane Bus...

铸模成型

Polyurethane, black in color, 50A durometer. Approximately 6.821 inch x 3.424 inch x 1.0 inch. Please see drawing for all specifications. POUR or INJECTION molding. Must have...

carafe - AP355, double wall

铸模成型

Attached files are for a double-wall carafe for a manual coffee & tea press. The files as attached were designed to be made from Tritan and are expected to be routinely subjected to forces of 50 lbs or more, internal pressures of 10 PSI or more, and are intended to be used with 355 ml or ...

Cushion/Chassis Assembly

铸模成型

Production of two individual items to be assembled together. Please inform buyer if you have assembly capabilities....

Polyurethane Bushing

铸模成型

2 pc Polyurethane bushing set. Samples for mold making will be provided. Need poured in both Shore 76A and 95A. PURPLE color needed. Please quote 100 sets of each harness. For reference, the largest Bushing is approximately 79mm OD x 56mm Length....

Pyramid

铸模成型

The part is a pyramid-shaped component made from acrylic. Buyer would like for the component to be optically clear. Buyer is only looking for budgetary numbers at this time. Approximately 78.6 mm x 78.6...

Low volume plastic figurine

铸模成型

Buyer is looking for a low volume quote for figurines of this approximate volume and detail level. The material is any castable plastic that will flow well enough to define all details of the model. Although this model is hollow,in the interest of reducing fabrication complexity, a completely...

INTERNAL ROUTING GROMMET

铸模成型

MOLD TOOL REQUIRED MATERIAL: BLACK SILICON OR EQUIV UNIT VOLUME: 332MM^3 15PC SAMPLES REQUIRED BEFORE PRODUCTION TARGET PRICE $0.25/PC 1000/PC FIRST ORDER / YEARLY FORECAST: 5000PC Approximately 9.1961 ...

Bushing

铸模成型

Urethane Bushing 92A. For pour casting the part can be second oped (machined) on one end. Approximately 2.49 inch OD x 1.25 inch long....

Rubber Mold Prototypes

铸模成型

Using rubber mold, make 4 samples of the attached design. The material of the 4-samples has to be flexible to evaluate the hinge. The design can change sligtly should you have input. The goal is for clear material, but flexibility is required, so we will accept an opaque ver...

Cement Flower Pot

铸模成型

Production of a Cement Flower Pot. It is a 24" x 8" x 3" inch molded concrete or ceramic pot....

850轮子技术规格

铸模成型

A buyer in 江苏 (Jiangsu), CHINA is looking to source 1 items (Molding)....

Urethane Bumper Plate Molding/...

铸模成型

Buyer is seeking a quote for Urethane bumper plates (Olympic Lifting) to be manufactured in the US for continuous production. Buyer is looking for either a manufacture of the finished product or just the urethane part of the product....

GPO

铸模成型

This product is 10.5" x 8" x 1/4" thick overall in size. Need for the solid green areas of the pdf attachment to be recessed at least half way into the material. There is a radius on each corner which is not specific in size and needs to have the 1/4" hole in the corner. Buyer wou...

1410204791

铸模成型

Production of slump formed acid etched glass. Model in inches. Approximately 12.56 inch x 12.56 inch x 2.56 ...

QMJU Floor Mat

铸模成型

MATERIAL: CRUMB RUBBER BUFFINGS, POLYURETHANE BOUND (CAN BE MIXED TOGETHER IN A BIN OR DRUM AND POURED INTO THE MOLD BY HAND) PRODUCT NEEDS TO BE DRAINABLE WHEN FINISHED; THE POROSITY OF THE BINDING BETWEEN THE RUBBER PARTICLES ALLOWS FOR THIS....

Molded Silicone Button

铸模成型

Production of a Molded part from platinum cured silicone rubber. Colored accordingly to RAL 3024. Approximately 39.0 mm OD x 27.5 mm l...

Glass chamber / stem

铸模成型

A one piece, chamber and stem combo that must be produced using borosilicate (pyrex) glass. Approximately 113.157 mm x 29.869 mm x 1...

Borosilicate vessel

铸模成型

Buyer is seeking to get the vessel (see attached file) manufactured with the following specifications: - Borosilicate - 4% tolerance on the inner diameter - Prefer no visible seam - Ability to have durable color...

GL_01

铸模成型

This is an optical quality glass part. Approximately 1.772 inch x 0.492 inch x 0.492 inch....

EyeballerTri

铸模成型

Production of a small plastic implement approximately 1 cm x 2.1 cm x 1 cm. Material is PP, ABS, or similar plastic that will with stand pressure on the point of the item....

Eyeballer

铸模成型

Production of plastic implement with strength to maintain tip shape when pressure is applied. Approximately 0.625 inch OD x 0.625 inch long....

Sealing Gland (5035-152)

铸模成型

Production of a silicone rubber gland seal. Preferred color is white, but other colors are ok to use. The ideal material is RTV 8111 silicone rubber sealing compound but other silicone rubber sealing compounds are acceptable to use. Approximate size is 0.78" diameter x 0.46" - 0.49" lon...

5mm Glass Straw with 2 90 degr...

铸模成型

Buyer is in search of a simple prototype 5mm (ID) Glass straw with two 90 degree bends. Part will not be use in a heated enviroment. Straw needs to be of "kitchenware sturdiness." Buyer is not familiar on wall thicknesses in this size tubing. If there are different thicknesses available, Buye...

Dish Glass

铸模成型

Production of a simple glass Dish. Approximately 110.0 mm OD x 10.0 mm long. Buyer would like to see if a glass version of this part is feasible....

Tray Top

铸模成型

Production of a Glass Tray. Approximately 6.0 inch x 5.0 inch x 0.75 inch....

Bottom Tray

铸模成型

Production of a Glass Tray. Approximately 6.0 inch x 5.0 inch x 0.75 inch....

Glass Cone

铸模成型

Production of a Glass Cone. Approximately 11.5 inch OD x 10.945 inch long....

Trolly Nip

铸模成型

Production of a #207610 Trolley Nip. This Nip tire is urethane over steel. The steel is 2.06 ID x 2.44 OD x .9 long. No features in the steel other than OD, ID, and Length. Steel tubing or free machining steel can be used. The urethane cover is 3.6 OD. The co...

The World's Most Extensive Manufacturer RFQs Search

铸模成型 招标书 - 獲得供應商線上報價

铸模成型通常用于制造具有简单几何外形的微型或小型零件。 制成图案并刻出加工面。 在加工面周围修建围堵坝，以便容纳熔化的金属或塑料，熔化的材料通过浇口或加热室导槽被浇入图案中。

Small Glass Dome- borosilicate...

铸模成型

MOLDED GLASS LENS

铸模成型

D-8103

铸模成型

LENS COVER

铸模成型

Glass Lens

铸模成型

Concrete Deadman

铸模成型

FP1

铸模成型

SCR Molded Boroscillicate Wind...

铸模成型

Rhum Bottle

铸模成型

50A Durometer Polyurethane Bus...

铸模成型

carafe - AP355, double wall

铸模成型

Cushion/Chassis Assembly

铸模成型

Polyurethane Bushing

铸模成型

Pyramid

铸模成型

Low volume plastic figurine

铸模成型

INTERNAL ROUTING GROMMET

铸模成型

Bushing

铸模成型

Rubber Mold Prototypes

铸模成型

Cement Flower Pot

铸模成型

850轮子技术规格

铸模成型

Urethane Bumper Plate Molding/...

铸模成型

GPO

铸模成型

1410204791

铸模成型

QMJU Floor Mat

铸模成型

Molded Silicone Button

铸模成型

Glass chamber / stem

铸模成型

Borosilicate vessel

铸模成型

GL_01

铸模成型

EyeballerTri

铸模成型

Eyeballer

铸模成型

Sealing Gland (5035-152)

铸模成型

5mm Glass Straw with 2 90 degr...

铸模成型

Dish Glass

铸模成型

Tray Top

铸模成型

Bottom Tray

铸模成型

Glass Cone

铸模成型

Trolly Nip

铸模成型

Tape Measure Marker

铸模成型

57600 Support Roller

铸模成型招标书 - 獲得供應商線上報價

铸模成型通常用于制造具有简单几何外形的微型或小型零件。制成图案并刻出加工面。在加工面周围修建围堵坝，以便容纳熔化的金属或塑料，熔化的材料通过浇口或加热室导槽被浇入图案中。