登录到您的MFG.com市场帐户
Find the perfect manufacturer to make your RFQs or assembly.
A buyer in Weston, Massachusetts, USA is looking to source a cut foam doll....
A buyer in Edmonton, Alberta,CANADA is looking to source Fabrication parts. A prototype bracket is needed to ensure proper fit. Upon successful fit, repeated orders of 50-100 brackets will be required. Ability to paint final brackets would be a bonus. Solidworks sheet metal file is supplied....
Production of a cut mica sheet, cut, top. Approximately 6" x 2.25" x 0.063". Material is Rigid Mica Sheet - Muscovite. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence.The buyer is bidding on this job for a customer. Although the order is not firm at t...
Production of a cut mica sheet, cut, bottom. Approximately 6" x 2" x 0.063". Material is Rigid Mica Sheet - Muscovite . Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The buyer is bidding on this job for a customer. Although the order is not firm at...
Production of a regulator bracket. Approximately 1.5" x 1.4" x 0.875". Material thickness, .075" P/N ED86102. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Coolant Tank. Approximately 139.7mm x 127mm x 69.85mm. Material is 1/8 aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Laser and cnc bending....
Production of a formed ATA Housing Mount Assy. Approximately 2.6" x 2.5" x 0.653". Material is stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Please quote for the assembly of these components....
Production of a cut ATA-Panel Mount Secure Clip-Rear. Approximately 2.55" x 1.75" x 0.015". Material is CRS steel. Include painting. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a cut ATA-Panel Mount Secure Clip-FRT. Approximately 2.5" x 1.5" x 0.035". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed ATA-Panel Mount Housing. Approximately 2.72" x 1.819" x 0.599". Material is CRS steel. Include painting. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed ATA-Spring Retainer SS. Approximately 2.42" x 1.923" x 0.029". Material is 304SS stainless steel. Include painting. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed ATA-Mounting Brkt Rear. Approximately 2.6" x 2.5" x 0.653". Material is CRS steel. Not painted. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Shadowbox. Approximately 46.625" x 22" x 0.5". Material is CRS steel. Not painted. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed P-A-018_ShadowBox. Approximately 46.625" x 22" x 0.5". Material is CRS steel. Not painted. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed 2 lamp T5 Socket Holder. Approximately 13.155" x 1.475" x 0.035". Material is crs steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Blank Socket Cover. Approximately 13.155" x 1.475" x 0.035". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed 4 Lamp T8 Socket Holder. Approximately 13.155" x 1.475" x 0.115". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed 2 Lamp T8 Socket Holder. Approximately 13.155" x 1.475" x 0.035". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed 4 Lamp T5 Socket Holder. Approximately 13.155" x 1.475" x 0.15". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed 3 Lamp T5 Socket Holder. Approximately 13.155" x 1.475" x 0.035". Material is CRS steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Clip. Approximately 0.693" x 0.67" x 0.438". Material is .016 Beryllium copper. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Bracket. Approximately 7.75" x 3" x 2.5". Material is aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Bracket. Approximately 1.31" x 1" x 0.88". Material is aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed Bracket. Approximately 5" x 2.25" x 2". Material is A-36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a cut Backplate. Approximately 64mm x 41mm x 2mm. Material is 6063 or similar aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. This part is a very simple cover plate. The material specification is very loose, though the part w...
The size of the hollow bar is 58.5mm x 43mm x 480mm ( OD x ID x Length ).Production of a cut Hollow bar. Material is C83600 brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
The size of the round bar is 58.5mm x 0mm x 520mm ( OD x ID x Length ).Production of a cut Round bar. Material is C83600 brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
The size of the hollow bar is 65mm x 36mm x 512mm ( OD x ID x Length ).Production of a cut Hollow bar. Material is C83600 brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
The size of the hollow bar is 52mm x 24mm x 540mm ( OD x ID x Length ).Production of a cut Hollow bar. Material is C83600 brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
The size of the round bar is 110mm x 0mm x 560mm ( OD x ID x LENGTH ).Production of a cut ROUND BAR. Material is C83600 brass. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a cut rectangle plate. Stainless brushed gr220 rec plate diam 300x400mm x 5mm thick....
Production of a cut square plate. Stainless brushed gr220 sq plate diam 300x300mm x 5mm thick....
Production of a cut square plate. Stainless brushed gr220 sq plate diam 200x200mm x 5mm thick....
Production of a simple disc plate. Stainless brushed gr220 disc plate diam 95mm OD x 3mm thick....
Production of a simple disc plate. Stainless brushed gr220 disc plate diam 91mm OD x 3mm thick....
Production of a cut disc plate. Stainless brushed gr220 disc plate diam 300mm OD x 5mm thick....
Production of a cut disc plate. Stainless brushed gr220 disc plate diam 240mm OD x 5mm thick....
Production of a cut disc plate. Stainless brushed gr220 disc plate diam 120mm OD x 3mm thick....
Production of a cut disc plate. Stainless brushed gr220 disc plate diam 110mm OD x 3mm thick....
Production of a cut motor mount. Approximately 1.948" x 0.635" x 0.63". Material is 10 ga 304 2m stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a formed hinge. Material is steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a welded Screw Tab. Approximately 1.06" x 0.4" x 0.376". Material is 316 stainless steel. Simple sheet metal part with threaded rod. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a cut WR250R Tail Rack. Material is 0.1875" T6061-T6 aluminum. Waterjet/laser/plasma/CNC cut aluminum. Countersink. Chamfer/debur all edges. powdercoat. Please quote from the attached DXF file....
Production of a cut Spindle Mount. Approximately 30.25" x 13.625" x 0.5". Material is A36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer w...
Production of a cut motor mount. Approximately 8" x 6" x 3". Material is A36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer will notif...
Production of a cut Spring Bracket. Approximately 7.75" x 1.88" x 0.5". Material is A36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer...
Production of a cut LUG 2. Approximately 7.5" x 2.25" x 0.375". Material is HRPO SHEET A36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The buyer is bidding on this job for a customer. Although the order is not firm at this time, the buyer ...
Production of a formed Clip. Approximately 3.125" x 3" x 3". Material is 301 Condition Hard .036 Thickness stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a cut back. Approximately 427.23mm x 198mm x 3.175mm. Material is aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Please quote on all RFQs as the winning award will go to one supplier....
Production of a Front. Approximately 482.6mm x 221.44mm x 0.125mm. Material is aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Please quote on all RFQs as the winning award will go to one supplier....
Production of a laser-cut Prs plate. Approximately 4.63" x 1.253" x 0.06". Material is MILD STEEL steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. LASER CUT PLATE - MATERIAL IS 16 GA MILD STEEL SHEET - PARTS NEEDED IN 2 WEEKS! - JOB WILL PR...
Production of a laser-cut Ace plate. Material is MILD STEEL steel. Approximately 4.625" x 1.125" x 0.06". Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. LASER CUT PLATE - MATERIAL IS 16 GA MILD STEEL SHEET - PARTS NEEDED IN 2 WEEKS! - JOB WILL P...