Find the perfect manufacturer to make your RFQs or assembly.
Voir pièce jointe pour détails 10 pièces par mois Production d’une DURIT (Tubage hybride). Environ 60.0 mm OD x 750.0 ...
Production of a carbon fiber EK Intake pipe. The buyer in
need of a composites manufacturer who can produce carbon
fiber/epoxy tubes. They would like the tubes to be made from
biaxial sleeve. They need smooth, glossy finish that is free
of defects and pinholes, as well as a smooth interior
Production of a FCC to JC Cable Harness, 15in . The tube OD
is approximately 3mm and 3.5mm, while the length is 411mm.
For the Strain Relief part it is 11mm wide and 9mm tall .
Please check the
attached drawing for details.
This is an electrical and gas line combination extruded with
Production of a Tubing Urethane Sleeve set (2 parts per
set). Material is urethane, non-welded, 90 Durometer
Shore "A", color is black. Approximately 5.12 OD x 9.37".
Please see drawing for all specifications....
Buyer is in searhc of a round fiberglass tube. Housing paper
cores for cutting. This sleeve slides inside the core so the
O.D. of this sleeve is critical. Please contact the buyer
with any questions. 120" long....
Production of a galvanized steel roller tube Approximately
3.07" OD x 22’ long. Please see drawing for specific
Material - steel comp 1010 or steel or iron cast overall
Material document and classification - astm a108 assn std
Response or qq-s-741 fed spec 2nd material response or
astm a47 assn std
3rd material response overall
Surface treatment - cadmium overall
Surface treatment document an...
Material - titanium alloy body, steel corrosion resisting
Material document and classification - ams 4967,6al-4v
assn std single ;
Material response body, ams 5735,a285 assn std single
Media for which designed - hydraulic fluid single response;
Hybrid tubing. Connection type. Approximate nominal
length - 4.000". Please see drawing for dimension
specifications. Unthreaded external tube 1st end, flange
Tubing material - aluminum alloy, ww-t-700/4, alloy 5052;
Tube outside diameter - 0.375 inches nominal;
Wall thickness - 0.035 inches nominal;
End connection style - b11 swivel nut, flared;
Mating end quantity – 2;
Material - aluminum alloy and steel, corrosion resisting;
Thread series designator ...
Tubing of Pipe Tee. Approx. 2.4" long. Please see drawing
for complete dimension information. Material - Plastic
Polyvinyl Chloride Overall, Material document and
classification - ASTM D-1784,CLASS
23447-B ASSN STD
Single material response overall
Media for which designed - water single respons...
Hybrid tubing of a cross. Approximate dimensions as
follows. Please see drawing for specifications.
Material - aluminum alloy overall;
Material document and classification - qq-a-225/9 fed spec
Response and qq-250/12 fed spec single material response
Connection type - ...
Co-extruded, Multi-lumen Pebax/HDPE/Plexar Shaft.
1. Material: Pebax 40D Inner: HDPE, LR-734/Plexar - 1:1
2. Cut to 4 foot lengths.
3. Color: Specified on the P.O.
4. HDPE liner to be as reasonably thin as can be
5. Double bag with label ...