登录到您的MFG.com市场帐户
Find the perfect manufacturer to make your RFQs or assembly.
A buyer in Glendale, Arizona,USA is looking to source a machined firing pin....
A buyer in Hayward, Minnesota, USA is looking to source a machined bar....
A buyer in Hayward, Minnesota, USA is looking to source machined part....
A buyer in Hayward, Minnesota,USA is looking to source a machined plunger....
A buyer in Hayward, Minnesota,USA is looking to source a machined support rod....
A buyer in Hayward, Minnesota, USA is looking to source a stop spacer....
A buyer in Hayward, Minnesota,USA is looking to source Machining parts....
A buyer in Edmonton, Alberta,CANADA is looking to source Machining parts....
A buyer in Powhatan, Virginia,USA is looking to source Machining parts....
A buyer in Bowie, Maryland,USA is looking to source Machining parts....
Production of a pressure kit. This is a set of milled parts, Aluminum. P/Ns ED00020 Rev A, ED00021 Rev A, ED85673 Rev A. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Cutting and milling of bars. Approx. 10.5" long x 0.50" wide x 0.125" thick. Please see drawing for complete dimension information. Buyer is looking for U.S manufacturing only....
Production of a milled Seal. Approximately 5.31" x 0.58" x 0.125". Material is Hast-x AMS 5536. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled Lid. Approximately 286.21mm x 73mm x 8.26mm. Material is 6061-T6 aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Buyer understands that this is a short lead time and would appreciate any help in this matter. Please c...
Production of a milled Housing. Approximately 286.21mm x 73mm x 43.51mm. Material is 6061-T6 aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled/turned Axle Parts. Approximately 0.312" OD x 3.75" long. Material is 2024, T6 OR T85 aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Three parts on one drawing. This is a multi part quote. All questions and submittals...
Production of a milled/turned Track Adjuster Piston. Approximately 2.997" OD x 10.375" long. Material is Forging Grade C or D steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quote per print, unless otherwise specified. Familiarity with DOD MIL...
Production of a turned Bushing. Approximately 0.4375" OD x 0.53125" long. Material is 303 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Quote per print, unless otherwise specified. Familiarity with DOD MIL-standards and ASTM standards necess...
Production of a milled/turned Track Adjuster Gland Nut. Approximately 3.6875" OD x 2.75" long. Material is Bronze, Aluminum Composition. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Familiarity with DOD MIL-standards and ASTM standards necessary....
Production of a milled/turned Connector Eye. Approximately 3.8125" OD x 3.9375" long. Material is Forging 1015-1025 or Casting 65-35 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Familiarity with DOD MIL-standards and ASTM standards necessar...
Production of a milled/turned Track Adjustor Cylinder. Approximately 3.8125" OD x 8.656" long. Material is Seamless Tube Alloy 4130, 8630, 8730 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Familiarity with DOD MIL-standards and ASTM standar...
Production of a milled/turned Machine Threaded Plug. Approximately 0.3125" hex x 0.5625" long. Material is Stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. Familiarity with DOD MIL-standards and ASTM standards necessary....
Turned mild steel part formed at specified angle...
Production of a milled BRACKET. Approximately 1" x 0.94" x 0.375". Material is 1010 - 1020 A36 3/8 THICK steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled SUPPORT. Approximately 9.375" x 3.75" x 0.5". Material is 1010 - 1020 1/2 THICK steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled SUPPORT. Approximately 13.0625" x 4.25" x 0.375". Material is 1010 - 1020 3/8 THICK steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a turned support-shaft. Approximately 0.375" OD x 11" long. Material is 5 titanium. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled Motor Cover. Approximately 4.00" x 2.641" x 2.00". Material is Delrin (Material color:black). Please see drawing for all specifications. CAD file of these parts will be directly provided by Buyer (File format should be specified by supplier.) NOTE: Dimensions are in inches in ...
Production of a milled BoxCover. Approximately 6.18" x 4.00" x 0.125". Material is Delrin (Material color:black). Please see drawing for all specifications. CAD file of these parts will be directly provided by Buyer (File format should be specified by supplier.) NOTE: Dimensions are in inches in the...
Production of a milled Circuit Box. Approximately 6.18" x 4.00" x 1.269". Material is Delrin (Material color:black). Please see drawing for all specifications. CAD file of these parts will be directly provided by Buyer (File format should be specified by supplier.) NOTE: Dimensions are in inches in ...
Production of a milled Support Beam. Approximately 207.01mm x 50.8mm x 38.1mm. Material is Delrin (White) plastic. Please see drawing for all specifications. NOTE: Dimensions are in mm in the attached drawings even though their comments say "Dimensions are in inches"....
Production of a milled AngledConnector. Approximately 1.00" x 1.00" x 0.25". Material is A6061 or so aluminum. Please see drawing for all specifications. NOTE: Dimensions are in mm in the attached drawings even though their comments say "Dimensions are in inches"....
Production of a milled BodySidePlate03. Approximately 220.38mm x 220.38mm x 6.35mm. Material is A6061 aluminum. Please see drawing for all specifications. NOTE: Dimensions are in mm in the attached drawings even though their comments say "Dimensions are in inches"....
Production of a milled BodySidePlate02. Approximately 6.89" x 2.441" x 0.25". Material is A6061 or so aluminum. Please see drawing for all specifications. NOTE: Dimensions are in mm in the attached drawings even though their comments say "Dimensions are in inches"....
Production of a milled BodySidePlate01. Approximately 175mm x 120mm x 6.35mm. Material is A6061 aluminum. Please see drawing for all specifications. Dimensions are in mm in the attached drawings....
Production of a turned Bobbin. Approximately 0.7" OD x 0.85" long. Material is Black Delrin plastic. Machine or mold plastic bobbin. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled Spanner Wrench. Approximately 14" x 2.5" x 0.62". Material is 4140 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a turned Roller. Approximately 0.435" OD x 0.135" long. Material is QQ-S-763 Class 440 stainless steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled/turned Hook. Approximately 4" x 3.56" x 2.74". Material is 6061-T aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled sensor mount. Approximately 40mm x 9.53mm x 9.53mm. Material is 6063 or similar aluminum. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. The material allow and the exact process are suggested, but the buyer can be flexible. T...
This is a faceplate for an instrument that is to be mounted in an small aircraft. Approximately 64mm x 41mm x 5.54mm. Material is 6063 or similar aluminum. The materials and alloy are flexible so feel free to suggest alternatives based on availability and cost. As always, please let the buyer know...
Production of a turned firing pin - Allso needs 3 milled flats. Part may be suited to swiss operation. Parts are needed by Aug 1,09, Please do not quote if you cannot deliver, parts WILL NOT be accepted after delivery date. Please do not quote HT or Plating we will handle in house. US suppliers...
Production of a milled/turned Pivot Stop B1. Approximately 4" OD x 1.5" long. Material is 1018 CR steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. United States suppliers only. No phone calls please....
Production of a milled/turned Pivot Stop A. Approximately 4" OD x 4.5" long. Material is 1018 CR steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. United States suppliers only. ...
Production of a milled/turned Shaft. Approximately 1.25" OD x 30.375" long. Material is 1018 CR steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. United States suppliers only. No phone calls please....
Production of a milled Platform Mount A. Approximately 7" x 4.25" x 0.75". Material is 1018 CR steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. United States suppliers only. No phone calls please....
Production of a milled Platform Mount 2A. Approximately 7" x 4.25" x 0.5". Material is 1018 CR steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence. United States suppliers only. No phone call please....
Production of a milled Spanner. Approximately 19.0065" x 5" x 0.625". Material is A36 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled Cover. Approximately 11.75" x 4.69" x 0.5". Material is MIL-A-12560 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....
Production of a milled Body. Approximately 7.12" x 4" x 2.25". Material is 4140 or 4340 steel. Please see drawing for all specifications. Unless otherwise stated, the drawing takes precedence....