MFG Manufacturer Directory

Find the right manufacturer for your custom parts.

ALLIEDTECH INC

ROMULUS, Michigan

+1000

Finished Metallic Components manufacturer with Plants and offices in Taiwan, China and main US branch in Romulus, Mi USA Components manufactured on following processes: A. CASTINGS Iron (Ductile, Gray, Alloyed),Al B. DIE-CASTINGSAluminum, Zinc C. FORGING Steel, Aluminum D. STAMPING Steel, Aluminum
Billet Precision Ltd. is a ISO 9001:2008 registered company located in Ottawa, Canada. We specialize in high precision machined components using the latest machining and inspection technology. Our people, technology, and leading-edge equipment ensures that we deliver innovative solutions for clients of all sizes across a host of industries. Our focus on productivity, efficiency and cost is achieved through a lean process, cellular manufacturing and the best resource allocation tools available. By making use of a unique combination of tools we are able to tackle any small and complex machined components in a host of challenging materials. Please feel free to contact us with any questions regarding our company. Joe Schuster President phone (613)822-1040 fax (613)822-2747 e-mail joe@billetprecision.ca

AMG Industries, LLC

Mount Vernon, Ohio

100-200

We specialize in the design, development, and manufacturing of highly specialized stampings, complex welded assemblies, and fabricated steel components. AMG competes in a variety of markets, including automotive, air gas compression, agricultural outdoor power equipment.Specific product offerings include exhaust assemblies and exhaust components, shims, gaskets and specialized stampings.

AMG was founded in 1904 as the Akron Metallic Gasket Company. In 1972, AMG officially entered the automotive market and the first decorative exhaust assemblies were provided to Cadillac Motor Car Division. Today, AMG's business continues to concentrate in the automotive arena, working closely on engineering and design with OEMs and Tier 1's. Current OEMs include Ford Motor Car Company, Honda Automotive, Fiat Chrysler Automobiles, and Toyota. In addition to exhaust tips, also known as decorative tailpipes, AMG is also a major supplier of fascia trim exhaust systems.These are usually seen as dual exhaust components assembled into the rear fascia of a car or truck. Since 1966, AMG has been based in Mount Vernon, Ohio (approximately 45 miles Northeast of Columbus, Ohio) in a 200,000 square-foot facility. AMG is ISO-9001 certified and employs roughly 125 associates.

Metalex Manufacturing, Inc

Cincinnati, Ohio

100-200

Metalex Manufacturing, Inc is located in Cincinnati, Ohio, United States and specializes in manufacturing the following processes: Machining, Fabrication, Electro-Mechanical Assembly.

NES Ltd.

Taipei City, T'ai-pei

50-100

Our company, NES Limited, is an approved fasteners and hangers supplier for many tier 1 automotive manufacturers all over the world. I would like to introduce our company to you in the hope that we will be selected as your preferred supplier and give your company more competitive strengthness in fastener solutions.NES Ltd., one of Lih Ta Group, is based in Taiwan and we provide a total solution for our customers in fasteners and hangers including manufacturing, engineering support and logistics service. We have local engineering service and warehouses in Europe and North America and manufacturing facilities in Taiwan and North America.We are a TS-16949 certified company and our customers include Faurecia, Kirchhoff, Magna, Norma, Inteva and GM tier 1 manufacturers etc. If our product lines are what you are looking for, we look forward to new business from you soon. Thank you!Best Regards,Angela WengNES Ltd.Cell: +886-955222457Tel: +886-2-8369-5959Fax: +886-2-8369-1717E-mail: angela@nes-corporation.com
RPPMInc. isagroupofqualifiedcompaniesunderoneumbrellastrivingtoprovidesuperiorquality,costcompetitivecomponents,assembliesandservicestotheIndustriesweserve.Welovetobechallenged!Machining,Assembly,MetalstampingandplasticMoldingareourspecialities.WealsosellNewTechnology7LayerPlasticstretchwrapatVERYcompetitivepricing!Pleasecallore-mailforaquickquote.OurcustomerbaseisprimarilytheUSAandCanada.

FAVI S.A.

Hallencourt, Picardie

200-500

Activities: as a subcontractor, DESIGN, OPTIMIZATION, VALIDATION, DIE-CASTING, MACHINING, ASSEMBLY and MARKETING of all components that can be made of die-cast copper alloys. FAVI History1957 : Founding of FAVI SA (Foundry and Shops of Vimeu), subcontractor in copper alloys pressure die-casting. Leader in the production of sanitary fittings (U-bends, floor drains…).1971 : Take-over of FAVI SA by the leading copper alloys refiner in Europe, AFICA. Creation of new alloys.1974 : Building of the new factory. FAVI becomes one of the European leaders in the production of water meter housings.End of the 70's: creation of CuZn27, standardization of our main alloys, and shipment of the first shift forks for gearboxes.1997 : FAVI is the first European foundry to be ISO14001 certified2000 : FAVI is the first French company to be OHSAS 18001 certified2001 : Beginning of production of die-cast copper rotors for electric motors2002 : FAVI is the first French company to be QSE certified2004 : Building of a second production plant, dedicated to small and mid volume production of non automotive components.2006: the 200 000 000th fork has shipped.2008 : FAVI is the first European foundry to be ILO OSH 2001 certified.

TML~MFG, LLC

Hot Springs Village, Arkansas

200-500

We are a full service contract mfg with facilities in Xiamen China. Sales and engineering support in USA to assist our OEM customer base. "TML~MFG endeavors to provide our customers the highest quality products and customer service. Total product value is at the core of everything we do. Our tradition of simplifying even the most difficult has guided us successfully into new markets and technologies paving the way for our customers to offer new and exciting products with minimal resource investment."

TUCKER INDUSTRIES

BENSALEM, Pennsylvania

50-100

Tucker Industries,certified ISO/TS 16949:2002. Small, medium and large stampings, Seventy-five employees,65,000 square feet, 60 presses to 600 tons, bed areas up to 4'x 9', Laser equipment. In-house tool and die shop. SME and FMA member. https://www.tuckerind.com e-mail: info@tuckerind.com Phone: 215-638-1900 Fax: 215-638-3477 Herbert Tucker e-mail: htucker@tuckerind.com

Reiss Manufacturing Inc.

Blackstone, Virginia

200-500

Specialist in Silicone rubber manufacturing and formulating www.reissmfg.com Reiss Manufacturing, Inc. and our Ronsil Rubber Division is the oldest manufacturer of Silicone Rubber in the USA. We have specialized in Silicone Rubber since 1947. We formulate, mill and mix compounds and meet most all specifications and custom formulate to solve specific problems. Other operations include extruding, molding by compression, transfer, injection and liquid injection, molding sheet, calendering roll goods and fabricating. Other special materials include Fluorosilicone and molded Viton® Rubber. We offer our materials in solids, with a variety of durometers, and sponge and foams in a variety of densities. Our engineering services will work with your engineers to assist in prototyping and recommend the most economical way to manufacture your product. Some of our products are: gaskets, seals, grommets, o-rings, bellows, special molded parts, tubing, spacers, molded sheet goods, calendered rolls in 12” precision tolerances and 36”+ widths. Our Fabricated operations include: splicing, die cutting, punching, notching, laminating, printing, and special packaging. We offer JIT programs and offer special deals based on blanket orders. Our Kentron Plastic Division specializes in extruded engineered plastics such as: TPE, TPO, Santoprene®, LDPE, HIPS, ABS and Flexible PVC. Co- extrusions can be extruded with one of our plastic materials and Silicone. Both Divisions are ISO9001/QS9000 registered to ensure the quality that is demanded from most of our markets we serve. Our current customers consist of OEM’s in a wide array of markets, government contractors, Rubber OEM’s and Rubber Distributors/Fabricators. Our corporate headquarters in Englishtown, NJ, molds a variety of engineered plastics. Their procedures include: High Pressure Structural Foams, Foams by Counter Pressure, and injection molding. For more information, visit our website at www.reissmfg.com or call us at 800-356-2829. We look forward to working with you! Reiss Manufacturing, Inc. – R. Allen Johnson, Director of Marketing

MetPlas Inc

Natrona Heights, Pennsylvania

20-50

Custom Contract Precision CNC Machining of Metals and Engineered Plastics. Water Jet Cutting. Mechanical Assemblies.

SI Plastics, Inc.

Jeffersonville, Indiana

20-50

SI Plastics, Inc., a "Custom Injection Molder" of thermoplastic components, was established in 1999. We operate three shifts five days a week in a clean facility utilizing a "Total Preventive Maintenance" program which decreases unexpected down time. Our company is built on the foundation of quality products, on-time delivery, and communication with customers and team members. Employee teamwork and involvement in all processes is utilized to better enhance the quality of the products, safety in the workplace, reliability of the product, and loyalty with the customer. Our Products include wiring harness components, such as clips, clamps and protectors used in the assembly of Toyota and Honda vehicles.

Pak-Lite, Inc.

Suwanee, Georgia

100-200

Pak-Lite, Inc. is located in Suwanee, Georgia, United States and specializes in manufacturing the following processes: Die Casting, RTV Molding, Investment Casting, Sand Mold Casting.

Floyd Manufacturing Co., Inc.

East Berlin, Connecticut

50-100

Floyd Manufacturing has been a high-volume, precision-machining operation since 1987. What started as an eight person operation dedicated to manufacturing high-precision products for the defense industry, has expanded to become a supplier for the high-volume, quality conscious automotive industry. Today, with over 75 employees, Floyd Manufacturing is dedicated to:Producing superior, precision-machined components – in high volume. Providing timely, personalized service for our customers. Offering competitive pricing in an ever-changing global marketplace.

Central Carolina Products

Burlington, North Carolina

50-100

CCP, Inc. is a minority owned, QS9000/ISO9002 registered custom injection molder of thermoplastics with finishing and assembly capabilities. We offer complete engineering assistance and support, and provide a wide range of value-added secondary services. We have the knowledge, technology, and experience to excel in the development, production, and on time delivery of products that meet the highest customer expectations in appearance, quality, and functionality.

Sturdy Corporation

Wilmington, North Carolina

200-500

OEM IN AUTO AND MARINE WITH AN INTEREST IN ELECTRONICS

ALOIS BERGER GmbH & Co KG

Ottobeuren, Bavaria

+1000

At home in the world - The Berger group of companies„Precision in Perfection" For 50 years Berger Holding has lived and breathed this philosophy. Established in 1955 by Alois Berger, our future-oriented enterprise has been growing consistently through continuous innovation. Starting out from humble beginnings, Berger Holding succeeded in becoming the worldwide largest family-run manufacturer of precision-machined parts. Currently, our enterprise has a staff of over 1800 people in 13 locations.Today, Berger supplies high-precision, complex, ready-to-install precision-turned, milled and ground parts to renowned companies all over the world, with diameters of 4 mm to 1800 mm and in lengths of up to 2000 mm, as well as assemblies, ball screw drives and motor spindles, no matter if you need only one component or a million.Berger Holding is based in Memmingen/Unterallgäu. Situated in a charming landscape at the foothills of the Alps, our plant is a nucleus of innovation. Our group of companies focuses especially on the continuous training of our staff, thus guaranteeing us high quality standards in our production.Proof to this a multitude of awards we received from both our customers and the government.Berger stands for full service: We cover all kinds of services, from design through production, heat treatment, shipping and logistics, and - if required - assembly of your components.For you, we have worldwide locations. We are where you need us because all our production locations worldwide are linked with their parent company by means of state-of-the-art information technology. Flexibility and mobility are our strengths. We welcome your challenge!

Glocom Electronics LTD

Taipei, T'ai-pei County

500-1000

Founded in 2000, GLOCOM is dedicated to provide the highest quality PCBs of full production printed circuit board facilities, Eiso (Taiwan) and Eisun (China), for overseas business. It is committed to achieve a high level of quality in all its products from prototype to mass production in a cost- effective and timely manner to our valued customers. With great customer's supports and demands over the years, we have expanded our service on the charges with Metal parts, Cable PCB Assembly in 2004. Since 2012, GLOCOM quickly developed itself as a world-class sourcing organization (an international exporter), not only specializing in the overseas PCB business for Eiso Eisun but also expertizing in her integration with strategic service locations that enable GLOCOM to provide the customers expert support and service , regarding the Flex board, Rigid-flex boards, MCPCB, PCBA, Stencil and even LED lighting products, except the superiority in the PCB industry to the customers. Our factories have been assembled under the GLOCOM umbrella to meet our customer's diverse technological and service needs. It remains our continuous mission to provide our clients with outstanding products, unrivaled customer service, and solid, competitive pricing, each and every time, therefore, it enables our customers to deliver products promptly into their marketplaces.

Hobson and Motzer, Inc.

Durham, Connecticut

200-500

Hobson and Motzer specializes in precision metal stampings, components and assemblies for medical, automotive and industrial applications. Our capabilities include in-house tool design, tool production, progressive and single stroke stamping, assembly, pad printing, laser welding and project management. Press equipment ranges from 30 tons to 250 tons. Stamp material thickness upto .150", specializing in stainless steel, copper based alloys and various steels. Hobson and Motzer can provide prototype to high volume production.

Tetra Mold and Tool Inc.

New Carslisle, Ohio

20-50

At Tetra Mold & Tool, Inc., our desire is to provide top-quality service and products to our customers by implementing our experience in the area of mold design and creation, and our expertise in the field of plastic injection molding. As a company, we have the opportunity to enhance our community and positively affect our industry through the following principles of manufacturing: TEAMWORK-EFFICIENCY-TECHNOLOGY-RELIABILITY-ACCURACY: 35 Years of Business Experience Designer and Builder of Plastic and Rubber Molds Custom Injection, Insert Molding and Custom Automatic Machinery Secondary Operations including Assembly, Printing, Welding and Finishing

Progressive Metal Forming, Inc.

Hamburg, Michigan

20-50

Progressive Metal Forming, Inc. - Profile pmf’s www.pmfdraw.com 39 years of metal forming service provides part development, tool design, tool build and production in presses ranging from 50 to 500 ton capacity, using transfer equipment and Eyelet machines to provide exotic shapes, deep drawn close tolerance components. Manufacturing processes include forming low carbon steel, stainless steel, aluminum and brass to meet customer product requirements. The service provided utilizes the corporation’s core competence developing processes to produce deep drawn components using cross functional team effort of the employee’s knowledge, skill set, and experience. The best forming process is selected for your product, progressive die, transfer or Eyelet. Employee’s average age is 42 years old with the majority having 10-25 years of service.

The Freeman Company

Yankton, South Dakota

50-100

The Freeman Company is located in Yankton, South Dakota, United States and specializes in manufacturing the following processes: Engineering & Design Services, Fabrication, Tube Modification, Machining, Electro-Mechanical Assembly, Gears, Sheet Metal.

Randolph Mfg

Easton, Pennsylvania

20-50

Established in 1978 producing parts on Davenport screw machines and have grown to a 40 production machine shop servicing the following industries: automotive,aftermarket automotive,electronic,military,medical,fasteners,inserts for molding, hermetic sealing parts,appliance parts,plumbing,and many different O.E.M.s.Capabilities include CNC machining and some assembly and secondary operations.Currently waiting for ISO 9000 /2000 certificate after achieving QS 9000 registration 3 years ago.Family owned sister company on adjoining 40,000 sq.ft. building has cold heading and specialty wire forming capability.

Formnet Inc.

50-100

Formnet Inc. was established in 1994 through the acquisition of the manufacturing operations of Huck Manufacturing Company (Canada) Limited. Over the last thirty years, our team has developed a reputation for the ability to design products and tooling to provide near net shapes. Combined with the skill of our people to maintain tight tolerances and control of the process and equipment, gives us the capability to produce unique and complex parts with excellent qualitiy. Ours is a world class team in each of the disciplines of design, engineering, tooling, manufacturing and management. Working closely with our customers and suppliers, we can be effective part of the customer's team to achieve manufacturing, engineering, quality and cost objectives. Formnet is committed to maintaining the lastest in technology, high quality, low cost and excellent service. Our customers include a variety of Tier 1 suppliers supplying virtually all the automotive OEM's producing in North America.

PREMIER COMPONENTS INC

Arlington, Texas

<10

OUR VISION STATEMENT Premier Components, Inc. strives to be a valuable resource to both our Customers and Principals by conducting the sales process with qualified sales professionals that work within a framework of consistent and documented processes. We employ active decision making processes in our "Forward Thinking Approach" to business. We will continue to grow the agency by remaining profitable and having a clearly defined plan for the future. OUR COMPANY PROFILE ESTABLISHED: September 1982 SIZE: We have six Outside Sales Representatives, One Inside Sales Person and One Administrative Manager. OBJECTIVE: Our primary objective is to continue to build a sales agency that both our customers and principals consider to be the "PREMIER" sales agency for component parts. There are three primary steps in reaching our objective. First, cultivate a customer following through service and quality so that Premier Components and the companies we represent are thought of first for mechanical and electro mechanical components. Second, carefully select a principal base that meets our customer needs and leads to long lasting partnerships. Third, assemble the right personnel that can provide a sales and service effort that results in profitable, long-term relationships between Premier, our principals, and our customers. TERRITORY: Texas, Oklahoma, Arkansas, Cities of Mexico bordering Texas. CUSTOMER BASE: Our customer base consists of OEM manufacturers, their contract manufacturers, and distributors in a variety of industries. Our sales approach has developed a broad base of customers. These accounts range from Fortune 500 companies such as; Alcatel USA, Johnson Controls, and Halliburton to smaller companies that may have only one requirement that we can service. We feel a customer base that crosses industry lines and contains companies of various sizes insulates Premier and our principals from swings in the economy that can affect a single industry. This philosophy has proven itself over the years. Despite fluctuation in the econoym, our agency sales have continued to grow. PRINCIPAL BASE: Premier's principal base consists of companies that primarily manufacture mechanical and electro mechanical components. We have made an effort to keep our lines as compatible as possible to make our sales effort efficient. We are very proud of the fact that we have a history of longevity with our principal base, in that most of our principals have been with us for over five years. SALES EFFORT: We feel to have an effective sales effort it must be: (1) PROFESSIONAL (2) ASSERTIVE (3) PERSISTENT (4) WELL MANAGED We make it a point to define our customer's needs and the timeliness of their requirements so that we can better determine when they should next be contacted. As sales is very much a name recognition business, our persistence allows us to make a habit of being in the right place at the right time. In addition to personal calls, we conduct periodic mailings and e-mail contacts, which are then followed up with a telemarketing effort to increase the effectiveness of the mailings. This allows us to contact more people in a large geographic area and pinpoint our personal sales calls. The results are bonafide opportunities for orders that, when coupled with proper follow up, result in business that is mutually profitable. On an annual basis, we forecast sales dollars by customer for each principal. The forecast is monitored throughout the year to help direct our sales effort.

MFG is Where Manufacturing Gets Done


100,000+ Manufacturers

Reviewed and Verified

26 Distinct Marketplaces

Aligned To Your Needs

~1,000,000 RFQs

Manufacturing RFQ Marketplace

Ready to jump in? Join Free Now