|
| Machining services for M8 Insert |
| |
|
|
Request for Quote Details:
The specific Machining processes that were specified were: Screw/Swiss Machining.
|
| |
| |
|
|
| |
Part #
Name
|
Category
(Material)
|
30539
M8 Insert
M8-1.25 internal threaded insert. Part Must be oil/grease
free, no metal chips allowed inside
part. Drill point must not break through closed of part.
O.D. Groove required for identification
purposes only. OD Knurl covers 90-95% of OD - does not
need to be 100%. Knurl needs to
be as course as possible as the insert is cast into
aluminium castings. Knurl is used
to "grab" onto molten aluminium to prevent twisting or
pulling out of casting.
Lot traceability required. Ability to supply SPC on
minimum thread depth and overall length
with min CPk of 1.33
AIAG PPAP required upon initial submission.
Supplier must be minimum ISO 9001:2000, prefer
QS9000 /TS16949 certified.
|
Machining:
Screw/Swiss Machining
Alloy Steel
|
Technical Specifications
Category
Screw/Swiss Machining
Material
Alloy Steel
Geometry
Cubic
Dimensions
0.0 x 0.0 x 0.0
Attributes
Material Grade
416 Stainless steel
Material Provided by Buyer
No
|
|
| |
|
|
|
|
|
|
