|
| Machining services for iron TEM/PAS disks |
| |
|
|
Request for Quote Details:
The specific Machining processes that were specified were: Chemical Machining.
|
| |
| |
|
|
| |
Part #
Name
|
Category
(Material)
|
23133
iron TEM/PAS disks
Stock material: Pure, single crystal body-centered cubic Iron cylinder with dimensions of ~10mm diameter and ~50mm in length
I would like my samples to be cut via electrochemical machining (ECM). It is crucial that these samples incur the least amount of mechanical damage since I will be conducting transmission electron microscopy on them and specifically looking for damage microstructures created by specific treatments of the specimens that I will carry out following the ECM.
I would like 2 quotes:
(1) The stock material needs to be electrochemically machined to produce disks that are 1.5 mm in thickness (keeping the diameter of 10 mm the same). This should give ~33 samples.
(2) The stock material needs to be electrochemically machined to produce disks that are 1.5 mm in thickness and that have 2 sides that are cut parallel to the z-axis of the crystal giving dimension of 6mm (straight edge) x 10mm (curved edge, this remains uncut). This should give ~33 samples.
A diagram is included in the file attachments as "ECM cutting.doc".
|
Machining:
Chemical Machining
|
Technical Specifications
Category
Chemical Machining
Geometry
Cubic
Dimensions
0.0 x 0.0 x 0.0
Attributes
Material Grade
Pure, single crystal body-centered cubic iron
Material Provided by Buyer
No
|
|
| |
|
|
|
|
|
|
