|
| Forging services for Disc |
| |
|
|
Request for Quote Details:
The specific Forging processes that were specified were: Open Die Forging.
|
| |
| |
|
|
| |
Part #
Name
|
Category
(Material)
|
59133
Disc
Production of a disc. Approximately 11.000" OD x 5.625"
thick. These dimensions protect finish sizes of 10.688"
OD x 5.38" thick. The size above may be
changed at supplier discretion to suit the requirements of
the specification. For drawing info, supplier must be JCP
certified & provide proof. Material – UNS NO6625 per ASTM
B564. Although an order is not firm at this time, the
buyer will notify all quoting parties once their customer
has made an award or decision.
Requires a separate Forging sketch including info with
respect to Note 2.N.(1), attached, and S4.C.(1)(B) (1)
thru (3), attached, for the production material. (Tension
test specimen may be from a prolongation).
Include LP - reference S4.C.(2)(B), but per contract.
Performance per T9074-AS-GIB-010/271 with Acceptance to
MIL-STD-2035A on all pcs. Include UT - Performance per
T9074-AS-GIB-010/271 (all pcs) Acceptance – Any indication
greater than or equal to the response from the Class B
quality level requirements of Table 6 of MIL-STD-2154
shall be rejectable (this requirement is from the contract
and takes precedence and supplements the Note S4.C.
(2)(A). (1) First article pc for destructive testing,
dimensions and material as above.
Requires a separate Forging sketch with info with respect
to macro, micro, and tension
tests. Reference Note 2.N.(1) & (2), also S4.C.(1)(C) for
first article pc. A minimum of (2) longitudinal & (2)
Transverse tensile tests shall be taken. (1) of each shall
be taken near the geometric center of the forging. Others
shall be taken from areas representing all section
thickness of final part. (PTI will help coordinate
location if an order is placed). Include LP - reference
S4.C.(2)(B), but per contract. Performance per T9074-AS-
GIB-010/271 with Acceptance to MIL-STD-2035A on all pcs.
Include UT - Performance per T9074-AS-GIB-010/271 (all pcs)
Acceptance – Any indication greater than or equal to the
response from the Class B quality
level requirements of Table 6 of MIL-STD-2154 shall be
rejectable (this requirement is from the contract and
takes precedence and supplements the Note S4.C. (2)(A)
Include a First article report per 2.N.(2)(C) & S4.C.(1)
(C).
Level 1 Markings on all pcs. would be required. Material
certifications on all material would
be required.
Note: Some notes are redundant but all apply. The HT
parameter of 1575 deg to 1900 deg
takes precedent on all pcs.
Production procedure, destructive and nondestructive
testing required – see attached.
General note 2N & Supplementry note S4 for detailed
requirements.
UT required – Performance per T9074-AS-GIB-010/271.
Acceptance – Any indication greater than or equal to the
response from the Class B quality
level requirements of Table 6 of MIL-STD-2154 shall be
rejectable
(this requirement is from the contract and takes
precedence and supplements the Note S4.C.
(2)(A).
Provide certifications and reports.
|
Forging:
Open Die Forging
Alloy Steel
|
Technical Specifications
Category
Open Die Forging
Material
Alloy Steel
Geometry
Cubic
Dimensions
0.0 x 0.0 x 0.0
Attributes
Material Grade
UNS NO6625
Material Provided by Buyer
No
|
|
| |
|
|
|
|
|
|
